Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: smiley on January 30, 2012, 10:02:13 PM

Title: Buttons popping off
Post by: smiley on January 30, 2012, 10:02:13 PM
I know I need to lose weight, but I've got this other problem that I hope will be much easier to solve:

My D/G Sandpiper has a disconcerting habit of popping a button off the G row sometimes when I'm playing energetically. Not just the one button but any random button which will suddenly fly off during a session. It gets a good laugh, but last weekend it happened in a big session and I was lucky to retrieve it in the darkness.

I'm thinking about using superglue to stick them on permanently, but I'd like to ask if this could be a problem in the future. Is there a scenario where I might need to take the buttons off for repairs etc?
Title: Re: Buttons popping off
Post by: Theo on January 31, 2012, 12:08:58 PM
How are the buttons attached?  Screw in, glue on, or on the end of a steel rod?
Title: Re: Buttons popping off
Post by: smiley on January 31, 2012, 09:39:21 PM
The buttons are pushed on to steel rods. I just push them back on again after they've popped off.
Title: Re: Buttons popping off
Post by: Ebor_fiddler on February 01, 2012, 05:12:44 PM
Castagnari do the same - we spent quite a bit of last Friday's session trying to find one white button on the floor. Though this might have been in revenge for searching for my right hearing aid the week before, which I'd never actually had in that night.  :|bl
Title: Re: Buttons popping off
Post by: Quebecois on February 01, 2012, 06:30:49 PM
I would use Gorilla glue or Epoxy. Just a tiny bit. SuperGlue does not "fill" and may not work well. 
Title: Re: Buttons popping off
Post by: Theo on February 01, 2012, 07:00:00 PM
With epoxy it will definitely never come off, even with heat!
Title: Re: Buttons popping off
Post by: Roland Carson on February 02, 2012, 03:13:11 PM
Is that a good thing or a bad thing Theo ?
Roland
Title: Re: Buttons popping off
Post by: Theo on February 02, 2012, 04:21:08 PM
Obviously depends on whether they need to come for for any reason.  I would favour something less permanent, pva, contact adhesive or superglue for example.
Title: Re: Buttons popping off
Post by: Hello on February 02, 2012, 04:59:42 PM
How long have you had it?  It may be worth taking it back to where you bought it.
Even if this is a common trait among Sandpipers (I've no idea if it is or not) the fact that the buttons pop off means that the instrument could be deemed unfit for purpose.
Title: Re: Buttons popping off
Post by: smiley on February 03, 2012, 02:00:14 AM
How long have you had it?  It may be worth taking it back to where you bought it.
Even if this is a common trait among Sandpipers (I've no idea if it is or not) the fact that the buttons pop off means that the instrument could be deemed unfit for purpose.

Unfortunately I live about 17,000 kms away from where I bought it, which rules out dropping in for a chat  (:)
I did ask that nice fellow Jon Loomes via email if he could send over a spare button to me, but that didn't happen.
Looks like a dab of superglue might be the best option now.
Title: Re: Buttons popping off
Post by: Hello on February 03, 2012, 09:57:26 AM
Another option may be some PTFE tape wrapped around the rod which the button sits on. It might make the fit a bit tighter and wouldn't involve glue. You could try it on just one first and see if it worked.
Title: Re: Buttons popping off
Post by: baz parkes on February 03, 2012, 03:11:26 PM
Didn't someone once recommend Loctite?

Baz
Title: Re: Buttons popping off
Post by: greybox1 on February 03, 2012, 03:44:15 PM
I would be careful using super glue as it could react with the button and turn out to be a disaster
I would research this further. ???
Title: Re: Buttons popping off
Post by: Ebor_fiddler on February 03, 2012, 03:46:28 PM
Your best bet would be a semi-permanent "breakable" wood glue, such as is used on violins.
Title: Re: Buttons popping off
Post by: Anahata on February 03, 2012, 04:15:31 PM
Your best bet would be a semi-permanent "breakable" wood glue, such as is used on violins.

Violin glue needs heat to undo it. If it's a plastic button you need to compare the melting points of button and glue...
Title: Re: Buttons popping off
Post by: Theo on February 03, 2012, 04:25:12 PM
I would be careful using super glue as it could react with the button and turn out to be a disaster

My experience of superglue is that it is much less likely to cause serious damage to plastics than is a solvent based glue where the solvents can cause softening.   In any case I would not worry because the quantity of glue you need is minute, it should get nowhere near the visible surface of the button and I'll repeat my advice to basically just use whatever is handy, but preferably not epoxy unless you want the joint to be completely permanent.

Your best bet would be a semi-permanent "breakable" wood glue, such as is used on violins.

Can't agree with that either.  Hide glue does not bond well with non-porous materials like metal or hard plastic.  It might help if you have nothing else available.
Title: Re: Buttons popping off
Post by: Rob2Hook on February 03, 2012, 05:20:56 PM
Didn't someone once recommend Loctite?

Loctite make a number of different "glues" for different purposes, but many of them fall within the superglue family.

Rob.
Title: Re: Buttons popping off
Post by: waltzman on February 03, 2012, 05:53:43 PM
 Hide glue does not bond well with non-porous materials like metal or hard plastic.  It might help if you have nothing else available.

I don't really think this is entirely true.  It binds so well to glass it will chip it.
Title: Re: Buttons popping off
Post by: smiley on February 08, 2012, 10:37:21 PM
If you glue your buttons on make sure you don't take them all off and get them mixed up, or individual differences in buttons will result in a row of buttons of varying heights. Of course any sensible person would only work on one button at a time.  Please don't ask me how I know this.
Title: Re: Buttons popping off
Post by: Quebecois on February 23, 2012, 04:06:02 PM
If you have patience, chewing gum may work! It sticks well to most surfaces, it can fill gaps, it is not permanent, but it needs a few days to harden...
Title: Re: Buttons popping off
Post by: Ebor_fiddler on February 23, 2012, 07:28:41 PM
No! That's only for bomber petrol tanks!  :|bl
Title: Re: Buttons popping off
Post by: pikey on March 09, 2012, 01:10:49 PM
If you have patience, chewing gum may work! It sticks well to most surfaces, it can fill gaps, it is not permanent, but it needs a few days to harden...

But does it lose it's flavour in the bed post overnight?  ;D
Title: Re: Buttons popping off
Post by: Boxhead on March 08, 2013, 11:55:52 PM
Well our Sandpiper buttons have popped off quite a few times and on my mates Sandpiper too. Took ours back to the Music Room who applied superglue. Now the metal wire under the air button has snapped, this is after two years of intensive playing , shared between two people playing pretty much every day. Gonna phone the Music Room tomorrow. Love the Sandpiper but could do without these issues...
Title: Re: Buttons popping off
Post by: Adam-T on March 09, 2013, 08:20:08 AM
shared between two people playing pretty much every day. Gonna phone the Music Room tomorrow. Love the Sandpiper but could do without these issues...

The Sandpiper may have been commissioned by the Music room but It`s still a Chinese box made from Chinese bits which costs much the same as a Chinese made Erica , I`d say it`s done very well given the hammer its had over that period . I`d bet a Chinese Erica or pokerwork wouldn`t have held up any better .
Title: Re: Buttons popping off
Post by: Boxhead on March 09, 2013, 12:11:48 PM
Yeah, it's been hammered allright (in the best possible way) Last time we took it to Cleckheaton we were told it was the most played Sandpiper he'd ever seen, due to the large patch of erased varnish on the bass cabinet were hands had rubbed it away. Was quite proud of that actually...
Title: Re: Buttons popping off
Post by: Rob2Hook on March 18, 2013, 07:15:43 PM
Interesting that you're losing varnish.  My best box (a Castagnari) has a semi-matt finish and the points where my hands are always touching it have become highly polished!  Actually, a lot of open canoeists insist that a paddle grip should not be varnished, it only causes blisters and the hand polishes it anyway.

Rob.
Title: Re: Buttons popping off
Post by: EastAnglianTed on March 18, 2013, 11:06:33 PM
contact adhesive  +1 from me  (:)
Title: Re: Buttons popping off
Post by: Kimric Smythe on April 02, 2013, 07:47:24 AM
There are a LOT of different types of "super glue" available now days. Hobby stores should have several available. I recommend the thick "gap filling" type as it won't run, and fills in imperfections in the joint. You can release it later from the metal arm by heating the arm with a soldering iron while you pull the button if you need to. Give it about 20 min to fully set.
 I ran into a lot of these glues in the 80's when I worked for Seagate doing hard drive testing.
 There is even a black rubberized flexible version.
SimplePortal 2.3.5 © 2008-2012, SimplePortal