Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Huw on February 08, 2012, 09:30:44 AM

Title: Broken Saltarelle feet.
Post by: Huw on February 08, 2012, 09:30:44 AM
I noticed that on a former thread that  some people have had the feet breaking through the bass board on Saltarelles, there is one for sale on ebay at the moment with a repair to that area. There is obviously a weakness in the ply boards that Saltarelle are using I have made a new one for my Nuage out of 3mm aluminium ( needs spraying with clear laquer to prevent black palms ) this should be a permanent solution to the problem. I was wondering if any other makes suffer from a similar problem or is this particular to Saltarelles only ?
Title: Re: Broken Saltarelle feet.
Post by: mattsmee on February 08, 2012, 09:33:05 AM
I have had a foot fall off my Saltarelle a few years ago. Though it did get dropped about a metre while in its soft case.

It has now adopted the name Heather..... after Heather Mills
Title: Re: Broken Saltarelle feet.
Post by: Huw on February 08, 2012, 09:41:00 AM
That's a bit cruel , brought a smile to my face though ;D
Title: Re: Broken Saltarelle feet.
Post by: mory on February 08, 2012, 10:11:52 AM
Think it's probably to do with the bolt on feet, with a screw on it's usually the thread that strips out of the ply, but the bolt on has nowhere to go in a knock hence the ply giving out, don't think it's to do with a particular grade of ply AtB mory
Title: Re: Broken Saltarelle feet.
Post by: Owen Woods on February 08, 2012, 10:54:52 AM
I found a Saltarelle foot in a pub in Sidmouth once :(
Title: Re: Broken Saltarelle feet.
Post by: Graham Spencer on February 08, 2012, 11:31:28 AM
H'mm, Saltarelle foot.....is that anything like tennis elbow?

G
Title: Re: Broken Saltarelle feet.
Post by: Rob2Hook on February 08, 2012, 01:54:59 PM
When taking my mate's Boube apart, we found that the corner blocks were snapped in half!  They've now been superglued back and the screwholes remade to ease the strain a little to avoid splitting them again.  I'm at a loss to see how a maker can get such a simple thing so wrong when the rest of the box is a good proven design (apart from the air button).

Rob.
Title: Re: Broken Saltarelle feet.
Post by: Kimric Smythe on February 19, 2012, 08:05:50 AM
This is a real problem with heavier piano accordions. It can be hard to repair the body frame if it is badly shattered. Hard aluminum is a good solution, and a wood veneer can keep the old look. Rubber feet and a pad on the bottom of the case the instrument is stored in can go a long way towards preventing this sort of thing.
 I am currently working on a 6 row Dallape chromatic that has the bass so badly shattered that cracks extend almost to the bellows frame.  It was evidently repaired (well) several years ago and dropped again.

Kimric
SimplePortal 2.3.5 © 2008-2012, SimplePortal