Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Keithypete. on February 08, 2012, 11:07:59 PM

Title: Celluloid/pearloid application.
Post by: Keithypete. on February 08, 2012, 11:07:59 PM
 Does anyone offer a celluloid/pearloid application service?  I think I remember a link to a company in Holland who did this sort of thing but can't find it for the life of me.
Title: Re: Celluloid/pearloid application.
Post by: Kimric Smythe on February 19, 2012, 08:06:42 AM
Repair or major work?
Title: Re: Celluloid/pearloid application.
Post by: Keithypete. on February 19, 2012, 09:30:18 AM
Major work. Pokerwork- size box to cover. Or perhaps not!
Title: Re: Celluloid/pearloid application.
Post by: Theo on February 19, 2012, 10:01:58 AM
I can supply you with celluloid sheet if you plan to try re-covering it yourself.
Title: Re: Celluloid/pearloid application.
Post by: Steve C. on February 19, 2012, 01:46:13 PM
See around 55 sec point.

There are some other's on YouTube as well.  Be careful when softening the celluloid, brain damage alert.

http://www.youtube.com/watch?v=rYsSifiDapo&NR=1

Not what you are wanting, but why not make your PW into a "presswood" rather than the celluloid?
Title: Re: Celluloid/pearloid application.
Post by: Malcolm Clapp on February 20, 2012, 12:42:32 PM
See around 55 sec point.

There are some other's on YouTube as well.  Be careful when softening the celluloid, brain damage alert.

http://www.youtube.com/watch?v=rYsSifiDapo&NR=1

Not what you are wanting, but why not make your PW into a "presswood" rather than the celluloid?



Or a couple of coats of a nice sky blue....suitably sealed and primed first of course.
Title: Re: Celluloid/pearloid application.
Post by: Steve C. on February 20, 2012, 01:28:40 PM
Malcolm:

"WOW"
"NICE"
Title: Re: Celluloid/pearloid application.
Post by: Keithypete. on February 20, 2012, 04:32:42 PM
I can supply you with celluloid sheet if you plan to try re-covering it yourself.


 I've thought about it but I'm a bit apprehensive about using & storing acetone - safely!
Title: Re: Celluloid/pearloid application.
Post by: Theo on February 20, 2012, 04:45:41 PM
Very understandable, but once diluted 50/50 with water to treat the celluloid I think both the fire and health risks are much less.
Title: Re: Celluloid/pearloid application.
Post by: Kimric Smythe on February 20, 2012, 05:36:22 PM
Ha that's my video!
 A couple of things, after a bit of research it would seem that Acetone has few health effects (I was surprised). Despite that you don't need much.
 You need a tray with a snug lid that is the size of ,or bigger the piece of celluloid you are working with. inside you will need a frame covered with screen to hold the celluloid off the bottom.
 Add about a teaspoon of acetone to the tray, and place your celluloid flat on the screen ,cover the pan. You only need about 15 min ,too long and the vapors will dissolve the celluloid. Check it every 5 min or so.
 It will be like rubber when it is about right, do not stretch it when applying, it will over time return to it's original size and do bad things to the accordion (warp wood ect). The glue is the hard part, it seems to be something thin with a acetone base, you might try a thinned contact cement.
 I use dissolved celluloid and a hobby glue.
You need to work fast, as the celluloid starts to stiffen fast, a cool to  cold room gives you longer working times.
 
I have only done small areas, and on a button box you may be able to forgo this ,and just glue and trim the hard sheets to the box like a veneer.
Title: Re: Celluloid/pearloid application.
Post by: strad on February 20, 2012, 08:25:58 PM
When using acetone, don't ever be smoking a cigarette at the same time. Produces phosgene gas which killed a lot of people in the trenches in first world war.

Nigel
Title: Re: Celluloid/pearloid application.
Post by: Kimric Smythe on February 22, 2012, 06:10:40 AM
 I would worry more about the cigarette as a ignition source, as both the celluloid and the acetone are quite flammable.
 I don't think you would get phosgene that way, as I think you would need to introduce chlorine somehow.
Title: Re: Celluloid/pearloid application.
Post by: Keithypete. on February 22, 2012, 07:15:46 AM
Does anyone offer this service other than on new instruments?
Title: Re: Celluloid/pearloid application.
Post by: strad on February 22, 2012, 04:09:33 PM
My warning was :- don't inhale a mixture of acetone fumes and cigarette smoke together. I seem to remember that the acetone fumes are affected by the heat. But smoking kills, anyway.

Nigel
Title: Re: Celluloid/pearloid application.
Post by: Theo on February 22, 2012, 04:18:12 PM
Does anyone offer this service other than on new instruments?

Suggest contacting the larger accordion dealers eg Allodi, Manfrini/Rolston (http://www.accordionrepairs.co.uk/).  Terry Birtley at Accordions of Coventry has been in the business a long time and may be able to help.
SimplePortal 2.3.5 © 2008-2012, SimplePortal