Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Andrew Wigglesworth on February 19, 2012, 05:34:20 PM

Title: Air button spring steel strip
Post by: Andrew Wigglesworth on February 19, 2012, 05:34:20 PM
Any ideas about where to get a little strip of spring steel suitable for an air button?
Title: Re: Air button spring steel strip
Post by: pete /acorn on February 19, 2012, 06:28:06 PM
Hi
Try a clock repairer,the should have off cut.dependant which melodeon repairing,on Saltarelle I have fixed to bass plate with a leather rivet.

Pete
Title: Re: Air button spring steel strip
Post by: Rob2Hook on February 19, 2012, 09:23:46 PM
I'd second the idea of a leather hinge.  On a friend's Saltarelle recently we found that the "spring" strip had taken on a set and was permanently holding the air valve open - this cannot happen with a leather hinge.

Rob.
Title: Re: Air button spring steel strip
Post by: Telemorris on February 20, 2012, 08:47:30 PM
Find an old wind up alarm clock. The spring on the inside might work. Be careful when you disassemble the spring casing though.  The springs are quite long and have a mind of their own when released.
Title: Re: Air button spring steel strip
Post by: Andrew Wigglesworth on March 09, 2012, 12:45:38 AM
Thought I ought to come back and say something.

I replaced the bass end-plate on my little Baffetti, and (as per suggestions) I've used a piece of leather for the air-button hinge. It's working very well at the moment so I'll just keep an eye on it to see how it gets on.

Thanks  (:)
Title: Re: Air button spring steel strip
Post by: pikey on March 09, 2012, 12:56:10 PM
I used a thick feeler guage on my Black Pearl III to replace the original strip which snapped - it works like a dream!!
Title: Re: Air button spring steel strip
Post by: waltzman on March 09, 2012, 02:52:09 PM
I used a thick feeler guage on my Black Pearl III to replace the original strip which snapped - it works like a dream!!

Brilliant!!  A handy source of spring steel in multiple "strengths"
Title: Re: Air button spring steel strip
Post by: Simon on March 09, 2012, 03:51:20 PM
I've used street sweeper bristles for mbiras; they could work for air buttons as well. Plenty lying around on the street if you look for them.
SimplePortal 2.3.5 © 2008-2012, SimplePortal