Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Telemorris on February 23, 2012, 08:31:02 PM

Title: Stepped Keyboard - height of steps
Post by: Telemorris on February 23, 2012, 08:31:02 PM
I'm designing a 2-1/2 row melodeon and plan to use a stepped keyboard design.

One thing I can't find is information about how high the steps are from one row to the next. I don't have access to a melodeon with a stepped keyboard from which to take measurements and I don't find information on the maker's websites talking about their own keyboard design. I'm interested in the vertical distance from the top of one button to the top of the next button one row up. That's the most important element as it directly affects the playability of a stepped keyboard.

Thanks!
Title: Re: Stepped Keyboard - height of steps
Post by: StupidFingers on February 23, 2012, 09:37:13 PM
Hi.

I've just measured my Excelsior Chiltern and the distance between it's buttons is 5mm or 0.2 of an inch.  Don't know if that's a common measurement or not as I've not got another stepped keyboard to check.  Hope that's of use.
Title: Re: Stepped Keyboard - height of steps
Post by: Lyra on February 23, 2012, 09:47:40 PM
my Loffet has 3mm steps (ish)
Title: Re: Stepped Keyboard - height of steps
Post by: Telemorris on February 23, 2012, 09:59:36 PM
Lyra and StupidFingers, what's the button travel? Meaning how much distance does the button move when you depress it? I'm wondering because in Lyra's case it might be that the top of a button in the upper row might sink below the top of a button in the lower row. Lyra, is that the case?

This is very helpful information. I'm hoping for the same information from someone with a Castagnari, Saltarelle, and others.

Thanks!!!
Title: Re: Stepped Keyboard - height of steps
Post by: george garside on February 23, 2012, 10:21:19 PM
lilly about 4 step and 3 travel. serenellini very little ?1 step  and  5 travel . Just curious why do you want a stepped keyboard?

george
Title: Re: Stepped Keyboard - height of steps
Post by: JohnA on February 23, 2012, 10:22:40 PM
Large three row Castagnari (Handry) 4 mm & 4 mm steps on the keyboard itself. Button travel 3-4 mm
Small three row Castagnari (Big 18) 4 mm & 3 mm (outer and inner steps respectively). Button travel 3-4 mm

Cheers    John
Title: Re: Stepped Keyboard - height of steps
Post by: Telemorris on February 23, 2012, 10:37:48 PM
Just curious why do you want a stepped keyboard?

I don't really know how to create metal key levers so I'm looking for a way to make a 2-1/2 or three row out of wood. The only way I've found so far is to make a stepped keyboard. You can make a two row flat keyboard but adding the third row and keeping the dimensions of the instrument small seems to indicate I need to go with a stepped keyboard.
Title: Re: Stepped Keyboard - height of steps
Post by: Lyra on February 23, 2012, 10:53:09 PM
yes, when fully depressed the top of the button is more or less level with the bottom of the button in the lower row, so the travel is about 4ish
Title: Re: Stepped Keyboard - height of steps
Post by: StupidFingers on February 24, 2012, 04:45:40 PM
Lyra and StupidFingers, what's the button travel? Meaning how much distance does the button move when you depress it? I'm wondering because in Lyra's case it might be that the top of a button in the upper row might sink below the top of a button in the lower row. Lyra, is that the case?

This is very helpful information. I'm hoping for the same information from someone with a Castagnari, Saltarelle, and others.

Thanks!!!

The underside of the buttons is 6mm above the case and they travel 4mm, the other 2mm being the felt washers.  It means that the top buttons don't pass the bottom buttons, in fact, they stop about 1mm above the bottom row which pretty much works out right, mathmatically speaking.
Title: Re: Stepped Keyboard - height of steps
Post by: StupidFingers on February 24, 2012, 05:25:24 PM
I don't really know how to create metal key levers so I'm looking for a way to make a 2-1/2 or three row out of wood. The only way I've found so far is to make a stepped keyboard. You can make a two row flat keyboard but adding the third row and keeping the dimensions of the instrument small seems to indicate I need to go with a stepped keyboard.

I did find a page that described a design for a 3 row stepped keyboard.  Unfortunately, I cannot find the link for it, so I'm going to have to try and remember how it worked.  It consisted of two straight levers and one L-shaped one.  I was going to try and describe it, but I thought a diagram might be a little easier to understand (not that it's a particularly good bit of artwork!).  The levers are the blue bits and the dark mucky yellow the case.

How well this would actually work in practice, I don't know.  Given that none of the usual spacing provided by the case are there, I would think that there is a risk of the keys dragging on each other resulting in some rather unexpected note combinations.

SimplePortal 2.3.5 © 2008-2012, SimplePortal