Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Cooper on March 13, 2012, 03:31:23 PM

Title: Repair-tools
Post by: Cooper on March 13, 2012, 03:31:23 PM
http://www.ebay.nl/itm/150773976625?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

What do you think of this? I dont do any repairing myself, but cleaning the inside or something i can do. I would like such a tool.

But what do you use for it? i thought 20 euros (including sending) is a bit much? or am i wrong? (i've been known to be wrong more often :-) )
W
Title: Re: Repair-tools
Post by: waltzman on March 13, 2012, 03:36:27 PM
I think it is just a tool for pulling bellows pins. 
Title: Re: Repair-tools
Post by: Lester on March 13, 2012, 03:56:31 PM
I think it is just a tool for pulling bellows pins. 

Yep thats what I would think they are

These HERE (http://www.amazon.co.uk/dp/B000LFV99U/ref=asc_df_B000LFV99U6968887?smid=A3P5ROKL5A1OLE&tag=googlecouk06-21&linkCode=asn&creative=22206&creativeASIN=B000LFV99U) probably just as good for €3 whaich are more or less what I use.
Title: Re: Repair-tools
Post by: george garside on March 13, 2012, 04:13:01 PM
I use a small pair of joiners pincers (out of a kids tool set).  They are same shape as the ones shown on ebay and only lack the two little cut outs in the blades and the padded handles, neither of which are needed. 

george
Title: Re: Repair-tools
Post by: tirpous on March 13, 2012, 04:48:03 PM
The cutouts are presumably to avoid marking the pins.  I find you can achieve the same thing with the unmodified tool, simply by closing the jaws just enough so that they will catch the mushroom head on pulling, but not enough for them to grab the shaft (hope this makes sense).
Title: Re: Repair-tools
Post by: Lester on March 13, 2012, 05:03:44 PM
The cutouts are presumably to avoid marking the pins.  I find you can achieve the same thing with the unmodified tool, simply by closing the jaws just enough so that they will catch the mushroom head on pulling, but not enough for them to grab the shaft (hope this makes sense).

Or you can cover the pin with some scrap material before grappling it, this also protects the casework in case the tool slips.
Title: Re: Repair-tools
Post by: pikey on March 13, 2012, 05:27:56 PM
I use a cheap carpet tack lifter. It works like a dream (and also works with lifting carpet tacks!)
http://www.ebay.co.uk/itm/Worldwide-Tools-Tack-Lifter-Brand-New-/360441195660?pt=UK_Hand_Tools_Equipment&hash=item53ebf82c8c
Title: Re: Repair-tools
Post by: mory on March 13, 2012, 06:57:36 PM
I use an old small pair of wire cutters with a curved face that allow a nice controlled leverage but always use a piece of shammy backed rigid plastic to protect the finish. I had a go with some of these once OK with groved pins in picture but can really damage the box surface if used on a ball head pin Ouch! AtB mory
SimplePortal 2.3.5 © 2008-2012, SimplePortal