Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Keithypete. on March 31, 2012, 09:38:16 AM

Title: Single stop conversion on Hohner Primatona.
Post by: Keithypete. on March 31, 2012, 09:38:16 AM
https://picasaweb.google.com/103571715539757100098/PrimatonaBeforeAFTER?authkey=Gv1sRgCNui-cOykLD_9gE

Some before & after photos of the conversion to a single stop on my Hohner Primatona. I was able to utilise the original spring mechanism & actuating arm so I can return it to original -  if I wanted to.

 The grille is bit industrial & over-engineered, but I think it looks quite good. A skeleton of stiff. wire mesh was covered with some aluminium mesh, from Charlie Marshall. Some gold spray, and trim from the original grille finish the job off quite nicely.

It's certainly opened the sound up, and as mentioned in Rees' thread about the grey Paolo, the two rows are much more balanced. This was my main aim in doing the work, but three switches to alter one set of reeds never sat very well with me.
Title: Re: Single stop conversion on Hohner Primatona.
Post by: Owen Woods on March 31, 2012, 02:06:12 PM
I would be interested to see you how did it, do you have any pictures of the inside?
Title: Re: Single stop conversion on Hohner Primatona.
Post by: Keithypete. on April 01, 2012, 02:35:45 PM
P.M. sent.
Title: Re: Single stop conversion on Hohner Primatona.
Post by: waltzman on April 01, 2012, 04:46:13 PM
P.M. sent.

Hey, I'd like to see it too.    ;D
Title: Re: Single stop conversion on Hohner Primatona.
Post by: Keithypete. on April 01, 2012, 06:11:29 PM
https://picasaweb.google.com/103571715539757100098/PrimatonaIVVoice3SwitchSingleStopConversion?authkey=Gv1sRgCIH7kInPj-ux7gE


Quite straightforward really. As much of the original gubbins as possible was left in. I tried to keep it as simple as possible. It works, and could be restored easily to original.   
Title: Re: Single stop conversion on Hohner Primatona.
Post by: Adam-T on April 01, 2012, 06:50:17 PM
Nice, inventive work !  , that reminds me, I`ve got to add a reedblock strap to one of my boxes
Title: Re: Single stop conversion on Hohner Primatona.
Post by: The Idle Rich on April 02, 2012, 04:15:17 AM
Nice job with the conversion.

I am curious if you had trouble removing the original grille? I also have a BC Primatona but even with all the screws removed from the grille I can't get it off. :-\ It still seems attached at the couplers. Any tips would be appreciated.

Rich
Title: Re: Single stop conversion on Hohner Primatona.
Post by: Keithypete. on April 02, 2012, 08:05:51 AM
 If  you're certain all the screws are removed, it's a case of very gently & delicately 'forcing' past the bottom off the switches. On mine there is a brass bar running the length of the grille.
 
 Photos after breakfast!


 https://picasaweb.google.com/103571715539757100098/PrimatonaGrille?authkey=Gv1sRgCOjdgOKpzITXBA
Title: Re: Single stop conversion on Hohner Primatona.
Post by: The Idle Rich on April 02, 2012, 02:52:01 PM
Thank for the tips. I gave it another half hearted attempt. Since it doesn't come off easy I think I'll let it be. I thought it would be fun to see and hear it with the grille off. You know the old saying "If it ain't broke don't fix it" or in my case If it ain't broke don't break it!  ;D
Title: Re: Single stop conversion on Hohner Primatona.
Post by: Keithypete. on April 02, 2012, 03:57:05 PM
Hmm.Thats probably best. Mine had tp come off because I was junking the switches. It makes a bit of a difference with the grille off, but not a lot.

Do you notice much difference between the rows, sound-wise?
Title: Re: Single stop conversion on Hohner Primatona.
Post by: The Idle Rich on April 02, 2012, 05:18:10 PM
I never thought about it before but the B row might be slightly louder. I guess that's because the couplers block the sound a little on the lower pallets (C row). I see you flipped around the badge man. That makes more sense.  Rich
SimplePortal 2.3.5 © 2008-2012, SimplePortal