Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: Andy Simpson on April 02, 2012, 01:13:11 AM

Title: A New Maker in England...
Post by: Andy Simpson on April 02, 2012, 01:13:11 AM
Not wanting to be responsible for some drastic thread drift, (http://forum.melodeon.net/index.php/topic,8581.msg114017.html#msg114017), the promised front page is here...

http://www.rocheaccordions.com/ (http://www.rocheaccordions.com/)

I am assured that a proper site is on the way and "coming soon" is in 2012 and not 1995. ;D
Title: Re: A New Maker in England...
Post by: Chris Ryall on April 02, 2012, 07:10:53 AM
Brave fella, it can be a hard road.  Look forward to seeing your work though.
Title: Re: A New Maker in England...
Post by: Theo on April 02, 2012, 08:01:40 AM
Ah, great to see a new maker on the horizon.  It is high time we had another maker in the UK.  The relatively low value of the £ against the € makes easier to compete with European makers than it would have been 10 years or so ago. 
Title: Re: A New Maker in England...
Post by: IanD on April 03, 2012, 10:31:43 PM
And you might finally see some radical new melodeon ideas being tried out... ;-)

Ian
Title: Re: A New Maker in England...
Post by: melodeon on April 04, 2012, 01:37:49 AM
Link to website shows no contact info.

Anyone have it ?
Title: Re: A New Maker in England...
Post by: Andy Simpson on April 04, 2012, 08:35:24 PM
There's an email address at the bottom of the page now.
Title: Re: A New Maker in England...
Post by: IanD on April 04, 2012, 10:38:20 PM
And you might finally see some radical new melodeon ideas being tried out... ;-)

Ian

What radical ideas do you have in mind?
Would you care to elaborate?
I am interested to know.

Some clues in previous postings on Melnet, for others you'll just have to wait :-)

Iam
Title: Re: A New Maker in England...
Post by: Ollie on April 04, 2012, 11:01:08 PM
And you might finally see some radical new melodeon ideas being tried out... ;-)

Ian

What radical ideas do you have in mind?
Would you care to elaborate?
I am interested to know.

Some clues in previous postings on Melnet, for others you'll just have to wait :-)

Iam

Magnet-operated keyboard, then?  :P
Title: Re: A New Maker in England...
Post by: pikey on April 05, 2012, 08:15:05 AM
Attached holder for a tankard?
Title: Re: A New Maker in England...
Post by: Quebecois on April 05, 2012, 02:51:18 PM
Jokes apart, I think there is always room for makers of quality instruments of any kind. The market is indeed limited, but the demand seems to remain constant.
Title: Re: A New Maker in England...
Post by: Andy in Vermont on April 05, 2012, 05:03:33 PM
Jokes apart, I think there is always room for makers of quality instruments of any kind. The market is indeed limited, but the demand seems to remain constant.


Indeed. 
Title: Re: A New Maker in England...
Post by: IanD on April 06, 2012, 11:42:37 AM
Attached holder for a tankard?
I like it, except we don't drink from tankards in my neck of the woods.

I guess you still use drinking horns, then ?

Ian
Title: Re: A New Maker in England...
Post by: Adam-T on April 07, 2012, 07:57:49 AM
Quote
I actually knew a guy who would drink poitín out of a wellington boot!
Never did him any harm either (I think).

Of course the danger there isn`t the wellington boot but the poitín in question  >:E
Title: Re: A New Maker in England...
Post by: Thrupenny Bit on April 07, 2012, 10:39:42 AM
In Devon that would be useful - a Wellington Boot attachement  >:E
particularly appealing for those farmers amongst us maybe  ::)
You could play a quick air or waltz to calm your herd before milking.
That would be good...........
Q
Title: Re: A New Maker in England...
Post by: Adam-T on April 07, 2012, 10:53:13 AM
Just make sure you keep away from the lowest  bass notes, they may get frisky  :o
Title: Re: A New Maker in England...
Post by: Thrupenny Bit on April 07, 2012, 10:57:53 AM
 ;D
good point
Q
Title: Re: A New Maker in England...
Post by: Owen Woods on April 07, 2012, 03:32:08 PM
And you might finally see some radical new melodeon ideas being tried out... ;-)

Ian

Ahhhh! Can't wait!
Title: Re: A New Maker in England...
Post by: IanD on April 08, 2012, 12:24:18 PM
And you might finally see some radical new melodeon ideas being tried out... ;-)

Ian

Ahhhh! Can't wait!

Me neither -- assuming all the ideas work, obviously ;-)

Ian
Title: Re: A New Maker in England...
Post by: brianread on April 08, 2012, 12:44:12 PM
There's an email address at the bottom of the page now.

Except under Ubuntu 11.10, using firefox, Chromium and Midori the email is obscured, perhaps it only works in IE?
Title: Re: A New Maker in England...
Post by: IanD on April 08, 2012, 01:05:32 PM
There's an email address at the bottom of the page now.

Except under Ubuntu 11.10, using firefox, Chromium and Midori the email is obscured, perhaps it only works in IE?

Doesn't work in Firefox or IE on Windows either...
Title: Re: A New Maker in England...
Post by: Graham Spencer on April 08, 2012, 01:09:02 PM
There's an email address at the bottom of the page now.

Except under Ubuntu 11.10, using firefox, Chromium and Midori the email is obscured, perhaps it only works in IE?

It's there in Chrome/Windows.
Title: Re: A New Maker in England...
Post by: Andy Simpson on April 08, 2012, 01:16:24 PM
I can see it fine with Opera, Google Chrome and IE using Windows 7.

A more detailed website is apparently due before the end of the month but in the meantime, anyone who wants his email address but can't see it can PM me.
Title: Re: A New Maker in England...
Post by: Owen Woods on April 08, 2012, 04:34:28 PM
Is this a joint venture with you doing the reed work Andy?
Title: Re: A New Maker in England...
Post by: Christopher K. on April 08, 2012, 05:08:04 PM
I'm using the latest Firefox and can't see the email, either. FWIW if you select all on the page and then copy the selected, you can paste it into a Notepad or other text editor and it's right there at the bottom. Funny glitch, though.

Looking forward to new boxes. As Quebecois mentioned earlier, there's plenty of room in the market for a new maker.
Title: Re: A New Maker in England...
Post by: Andy Simpson on April 08, 2012, 05:37:53 PM
Is this a joint venture with you doing the reed work Andy?

Nope, it's a one-man show. Only one Andrew and no Simpsons are involved.
Title: Re: A New Maker in England...
Post by: Owen Woods on April 08, 2012, 06:04:45 PM
In which case you should get him to join melnet, the more makers the better on here!
Title: Re: A New Maker in England...
Post by: diatonix on April 08, 2012, 08:15:42 PM
I'm not that anxious to meet my Maker.
Title: Re: A New Maker in England...
Post by: Andy Simpson on April 08, 2012, 10:22:13 PM
I am, I've switched from trying to get 5 portions of fruit or vegetables a day to 5 packs of cigarettes a day and start each one with a couple of large martinis followed by cycling to work on the wrong side of the road.

As for joining melnet, it's a "maybe", (don't hold your breath, he didn't even have a mobile phone until 2007  ;D ).
Title: Re: A New Maker in England...
Post by: Andrew Wigglesworth on April 08, 2012, 11:10:29 PM
There's an email address at the bottom of the page now.

Except under Ubuntu 11.10, using firefox, Chromium and Midori the email is obscured, perhaps it only works in IE?

It's because of the programme that he's used to write the page. It has produced some frankly demented CSS (and HTML) code which amongst other things has placed the email address below the bottom of the screen on many people's computers.
Title: Re: A New Maker in England...
Post by: Chris Ryall on April 09, 2012, 07:15:03 AM
I think it's legal enough Andrew, and validates as HTML 4.01 transitional. Just not laid out in a standard, or as you imply, sensible way. eg "contact" somewhere in a main menu, usually at the top. Serif purports to be a 'business' webpage maker it's let him down, he's ended up simply with an HTML business card, albeit "generously" spaced

But this thread had perhaps forgotten that it's not about quality the website, and although a new quality UK maker has to be a good thing, in the end it's about the quality of the kit.
Title: Re: A New Maker in England...
Post by: brianread on April 09, 2012, 09:19:19 AM
I think it's legal enough Andrew, and validates as HTML 4.01 transitional. Just not laid out in a standard, or as you imply, sensible way. eg "contact" somewhere in a main menu, usually at the top. Serif purports to be a 'business' webpage maker it's let him down, he's ended up simply with an HTML business card, albeit "generously" spaced

But this thread had perhaps forgotten that it's not about quality the website, and although a new quality UK maker has to be a good thing, in the end it's about the quality of the kit.

It may be "legal", but it is not doing the job the creator expected, which is why I flagged it.  As you say it is not relevant to the quality of the boxes that might come out of it.  I agree that another UK maker has got to be a good thing.  I hope he can make a good living out of it.
Title: Re: A New Maker in England...
Post by: mory on April 09, 2012, 09:42:54 AM
But will he be a maker or an assembler?  >:E
Title: Re: A New Maker in England...
Post by: Thrupenny Bit on April 09, 2012, 09:46:02 AM
Oh no.... Mory what have you started  ;)
We'll be here for years now!
Q
Title: Re: A New Maker in England...
Post by: Anahata on April 09, 2012, 09:47:34 AM
But will he be a maker or an assembler?  >:E

Judging from the hints at innovative new engineering practices, I'd guess he's building mostly from scratch.
I doubt that includes minor hardware like buttons and strap brackets.
Title: Re: A New Maker in England...
Post by: Andy Simpson on April 09, 2012, 12:46:34 PM
I've just got off the phone with him, he says it's very helpful of everyone to point out glitches and he's tried to fix the formatting of the page so it might be visible now. He also said that a proper website will be along soon enough but he's concentrating on finishing his current batch and he's also still seeing out his notice at his old job so it's not top of the list of priorities.
Title: Re: A New Maker in England...
Post by: Clive Williams on April 09, 2012, 09:44:17 PM
I'd just like to add my drooling in anticipation to this thread; should be an extremely interesting development. Very much looking forward to hearing/seeing more.

Clive
Title: Re: A New Maker in England...
Post by: rees on April 10, 2012, 08:57:04 AM
I'd just like to add my drooling in anticipation to this thread; should be an extremely interesting development. Very much looking forward to hearing/seeing more.

Clive

Ditto.
Title: Re: A New Maker in England...
Post by: IanD on June 07, 2012, 11:53:22 PM
I gather there's now a Facebook page (but with little on it as yet) at http://en-gb.facebook.com/people/Andrew-Roche/100003929780079 (http://en-gb.facebook.com/people/Andrew-Roche/100003929780079)

The profile photo might look familiar to those who remember in my reed pan notebook sketches from last year...
Title: Re: A New Maker in England...
Post by: Martyn on June 08, 2012, 11:45:29 PM
Andrew Roche has recently updated his Facebook page https://www.facebook.com/profile.php?id=100003929780079

The single voice D/G instruments will be 4th button start with Anahata layout.

The 2-voice D/G 21+2+9 bass instrument (extra F#/C# bass note) will also have the Anahata layout, only with low accidentals on the first button of each row and the standard accidentals on the extra two buttons. These will be Dedic tuned as standard.

These will be available from me at www.melodeonrepairs.co.uk as soon as they are ready.

Look out for updates on Andrew's Facebook page.

Martyn
Title: Re: A New Maker in England...
Post by: Owen Woods on June 08, 2012, 11:49:19 PM
Ah, are you doing the reed work on them then Martyn? Fantastic ;D
Title: Re: A New Maker in England...
Post by: Martyn on June 08, 2012, 11:57:16 PM
Andrew will be doing everything himself.

Martyn
Title: Re: A New Maker in England...
Post by: Theo on June 09, 2012, 12:45:33 PM

These will be available from me at www.melodeonrepairs.co.uk as soon as they are ready.


His website says "Individually made to each customer’s personal specification"  so is there a standard model too?
Title: Re: A New Maker in England...
Post by: boxlad on June 09, 2012, 01:22:54 PM
Any photos of these boxes anywhere yet? WOuldn't it be great to see what they look like!
Title: Re: A New Maker in England...
Post by: Andy Simpson on June 09, 2012, 10:23:39 PM
I've got one on my phone...

I've never heard anything about standard models.

The D/G one is a twin of my F/Bb...but I changed my mind about the reeds so I've been bumped to the back of the queue... ::)
Title: Re: A New Maker in England...
Post by: Andrew Roche on August 24, 2012, 04:49:23 PM
Sorry about the lack of info. Unrelated hindrances delayed things for a while and my own perfectionism and a lack of financial pressure that I want to make the most of means I'm not rushing to get anything out in the open before everything is juuuust right. I'm keeping things under my hat until I'm totally satisfied so I haven't shown any of the prototypes or work in progress, (think how much more impressive the Soviet Union's space programme looked before everyone knew about all the re-entry accidents and launch pad explosions).

Yes, the website is bloody awful and that one page took me all night with some ghastly free software. Somebody who knows what they're doing has offered their services so a proper site is going to happen. When that is done it'll still only be more of an online brochure with news, updates and new photos on Facebook, which is just about within my computing capabilities...

There won't be any standard models, all boxes are treated as one-offs, but every now and then, (certainly in the beginning before my order book is too full), they'll be "off the peg" instruments available.

Think that's everything...
Title: Re: A New Maker in England...
Post by: Owen Woods on August 24, 2012, 05:52:16 PM
Ah, you know how to tantalise Andrew!

Can't wait to see examples of your work.
Title: Re: A New Maker in England...
Post by: Lyn on October 27, 2012, 02:26:06 PM
If I was in the market for...say a 2 and a half row, DG I'd LOVE some of those couplers which you don't have to stop playing to alter. Seen only I think on the high end Castagnaris and Saltarelles. I'm tentatively heading in that direction and would LOVE some easy-to-get-at buttons/couplers, but existing models are at the very expensive end of the market.
Title: Re: A New Maker in England...
Post by: Andrew Roche on October 27, 2012, 08:30:58 PM
I am right now building a 14 bass 2.6 row 3 voice E/A with a lever behind the fingerboard for the low reed bank and forthcoming is a 12 bass 2  1/2 row 3 voice D/G with 3 couplers in the same position for all combinations.

Things have been gradually shaking out and I've been refining the designs and methods and I'm rather pleased with the results so far. They'll be some pre-production boxes out there fairly soon.

I'm also investing in a CNC mill and lathe so when I'm ready to start taking orders, (and have got the hang of its operation...), I can produce even more things in-house without the limitations of off-the-shelf Italian parts and I'll be able to offer options like metal grilles and other assorted goodies.

...and I may as well point out that as a one-man operation I'll be coming in under the VAT threshold so I'll be able to price things fairly close to the high-end Italian makers whilst being able to offer a lot more for your money with A Mano reeds as standard and virtually unlimited options on an instrument individually designed and made for each customer by one person.

Of course, this all means nothing without some instruments to entice people with so I'd better get back to work...
Title: Re: A New Maker in England...
Post by: Lyn on October 29, 2012, 10:37:53 PM
Andrew, I am literally at the 'thinking about' stage; feeling I'd like the extra accidentals and basses to enable me to go further with the kind of music I'm learning with my teacher - he thinks I'm approaching the stage where I'll be getting frustrated with my 2 row . We'll be well into next year before I make any decision, but I am looking around, and it's been intersting to read this thread, looking forward to hearing more about your boxes.
Title: Re: A New Maker in England...
Post by: Ellison on April 08, 2013, 05:37:06 PM
Resurrecting this old thread because either I'm out of the loop or there hasn't been any news.

Andrew (or anyone else in the know) any instruments to show yet? I can feel the old urge to go box hunting again.

Martin
Title: Re: A New Maker in England...
Post by: Andrew Roche on April 15, 2013, 12:06:47 PM
Where to start...

2013 so far has been pretty much a bust and I'm starting to suspect that I may be the victim of some sort of voodoo curse. A moderately serious hand injury, a bout of fairly heavy duty food poisoning and a nasty lingering virus, occurring with suspiciously good timing one after the other, have conspired to prevent me from making any real progress and left me in rather poor condition. Fingers crossed though, I'm on the mend working on getting back in step. My workshop situation continues to be a problem but that'll hopefully change in a few months. Where I am at the moment has proved to be inadequate and awkward to work around and an attempt at moving somewhere else last year ended very badly and resulted in considerable complications that have held a lot of things up.

I've also stopped playing around with the designs so much, it's part of what's held things up but I think it'll prove to be worth it. The boxes are very different, inside and out, from what I would have been offering if I'd rushed into production last year. The prototype boxes were strictly for testing ideas and never meant for public consumption so I omitted cosmetic touches, used offcuts and mismatched pieces of wood, etc and since you never get a second chance to make a first impression, none of them were going to be the first thing anyone saw. For much the same reasons, it's not going to be anything in bits and pieces either.

Lastly, sorry to all the interested people I've kept waiting, I'd enjoy nothing more than to take your money be able to have some boxes out there for your consideration and I'm working on it!. An even bigger sorry and a grovelling thank you to the people who've been waiting for boxes as well and have indulged me with the sometimes silly cloak and dagger secrecy surrounding things, mille fois merci.
SimplePortal 2.3.5 © 2008-2012, SimplePortal