Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: ioang on April 12, 2012, 02:53:32 PM

Title: Broken Treble Button & Split Wood.
Post by: ioang on April 12, 2012, 02:53:32 PM
Hi everyone,

I'm in the very annoying situation of having had a treble button ripped out of my less than a year old Dino Carnival II - please see the pic below:

(http://dl.dropbox.com/u/3648716/dino_damage.JPG)
http://dl.dropbox.com/u/3648716/dino_damage.JPG (http://dl.dropbox.com/u/3648716/dino_damage.JPG)

I've also only gone and lost the bloody button. I've ordered a replacement from Scotland but it's not just the button, the wood's split and so when pressed down into the hole it sticks. Luckily it's only the highest note (closest to the floor) on the D row so I'll be honest, I don't get up there very much, but it's annoying - especially if I want to ever sell the thing.

Any advice on how I can, erm... unsplit the wood and reattach a button? Or is there more serious repair that needs to go on here?

Thanks in Advance.
Title: Re: Broken Treble Button & Split Wood.
Post by: waltzman on April 12, 2012, 04:04:32 PM
I had to repair the exact same thing on my Casta.  I used a syringe and needle to inject PVA wood glue into the crack and clamped it with the tip of a needle nose Vice-grips pliers. Clean the excess glue off carefully including cleaning out the hole for the button screw with a toothpick.
Title: Re: Broken Treble Button & Split Wood.
Post by: ioang on April 13, 2012, 10:51:39 AM
Thanks waltzman - that's reassuring. I'll get on it.
SimplePortal 2.3.5 © 2008-2012, SimplePortal