Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: OldDog on April 13, 2012, 07:22:43 PM
-
Zinc reedplates tend to develop a spotty, thick, white coating on them after so many years. Does anybody have a way of removing this deposit? A brass bristle brush works after a fashion, but isn't very good for getting into the reed slots in the plate. I don't want to try wiping it down with vinegar or another chemical if I don't know what might happen when I do.
Thanks for your help.
Paul N.
Tonawanda, NY
-
Zinc plates don't always go powdery like that, it must depend on the conditions it is stored in. I imagine high humidity is a big factor.
I've just invested in an ultrasonic bath which makes a lovely job of cleaning off all the loose white powder, as well as powdery rust, and is great for getting rid of all the muck that can accumulate in the gaps at the side of the reed tongue.
-
Zinc plates don't always go powdery like that, it must depend on the conditions it is stored in. I imagine high humidity is a big factor.
I've just invested in an ultrasonic bath which makes a lovely job of cleaning off all the loose white powder, as well as powdery rust, and is great for getting rid of all the muck that can accumulate in the gaps at the side of the reed tongue.
Theo
Which bath did you get?
-
Theo,
What do you use in the ultrasonic bath? Just water, water and vinegar, water and dish washing detergent, something else? I have an ultrasonic that I've been using to clean my harmonica and other small objects. I use water and vinegar on those things. The harmonica has a plastic comb. I'm not dumb enough to put a wooden comb in there. I guess I never thought of using it for the reedplates.
Regards,
Paul N.
-
Me neither..........
I have a grotty old Scholer Concertina with aluminium & Brass unified reedplates (one for each row of each end) like a harmonica and they`re a bit wheezy when played so a dip in the ultrasonic looks like a good idea - I usually use washing up liquid for other stuff as it shifts oily deposits. likewise, suggestions on what to use on reedplates would be welcome.
-
I've used water and vinegar in my ultrasonic with excellent results.
-
I've used water and vinegar in my ultrasonic with excellent results.
What bath do you use?
-
I've detailed my ultrasonic cleaning regimen here before...
http://forum.melodeon.net/index.php/topic,8955.msg111463.html#msg111463
Vinegar is easily the best solvent I've tried. I don't recall the exact model of cleaner I have but it was about £25, reduced from about £40, at Maplin. Martyn White can testify to how clean I was able to get things using it but some elbow grease was required; to get really good results from an ultrasonic bath alone I'd imagine that you'd have to invest in one of the proper industrial models starting at a couple of hundred pounds.
*gone*My days working on boxes are behind me now and I'm not going to have much use for it so my ultrasonic cleaner is up for grabs for £10 + postage if anyone's interested... *gone*
-
Sent you a P.M. (and just reminded myself about some buckram ;))
-
Which bath did you get?
I big one - I want to be able toe easily get a whole set of reeds cleaned in one go. It was secondhand off fleabay. It has a heater which is assume is important for removing wax in particular.Theo,
What do you use in the ultrasonic bath?
I'm wary of the long-term effects of cleaning so I've opted for a special cleaning solution designed for sensitive metals (http://www.machine-dro.co.uk/sensitive-metals-ultrasonic-cleaning-solution-1-litre-.html). Ultrasonic cleaning of metals like aluminium, zinc, etc can produce surface erosion so you have to be careful. I'm not yet completely clear on the parameters, but with zinc the length of time in the cleaning process is important, too long and you can actually produce a powdery surface on zinc.
-
I've used water and vinegar in my ultrasonic with excellent results.
What bath do you use?
I use a small one - James Ultrasonic 7000.