Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Jack Humphreys on June 09, 2012, 07:09:18 PM

Title: Making changes in nailed reeds
Post by: Jack Humphreys on June 09, 2012, 07:09:18 PM
Another request for info please.
I'm interested in a maugein box seen in a small ad... But then I remembered that they had NAILED reeds instead of waxed.
It's very likely that I may wish to change around the reeds to fit the button arrangements I am used to.
So, does the nailing mean that it would be difficult or impossible to make those changes?
Title: Re: Making changes in nailed reeds
Post by: Kimric Smythe on June 10, 2012, 06:17:05 AM
you may have to move the leather sealing surfaces , in addition to carving/adding wood to the block to accommodate the new reed. I recommend getting a wire drill a bit smaller than the nails used to pre drill the new nail holes, this will avoid splitting the block when you put in the nails.
SimplePortal 2.3.5 © 2008-2012, SimplePortal