Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: malcolmbebb on June 28, 2012, 07:10:01 PM
-
There have been a few sets of bellows from Slovenia advertised on Ebay lately:
http://www.ebay.co.uk/itm/NEW-Accordion-Bellows-for-HOHNER-or-other-accordion-/300733857118?pt=LH_DefaultDomain_0&hash=item4605227d5e#ht_500wt_968
Anyone know if they're any good?
Malcolm
-
Judging from the photos the curve of the corners is not the same as Pokerwork/Erica bellows.
-
From the other listings it appears that they will make custom sizes so I assume that different corners are available.
The price is certainly competitive.
-
Their website, needs to be looked at but have to go out
http://vsezaharmoniko.com/index.php?route=common/home (http://vsezaharmoniko.com/index.php?route=common/home)
-
I have found the weltmeister 86w bellows to be a excellent fit on pokerwork hohners. the bellows are of better construction in general with cloth backed bellows tape and cloth on the inside bellows folds too. Also more color options.
Kimric
-
Next question is how much do 86W bellows cost and are they from Weltmeister direct ? , I know you`ve been around the factory but will they sell them to mere mortals :o
-
I have found the weltmeister 86w bellows to be a excellent fit on pokerwork hohners. the bellows are of better construction in general with cloth backed bellows tape and cloth on the inside bellows folds too. Also more color options.
Kimric
Can't remember but i used some on a pokerwork 6 years ago and was very impressed. Haven't got that box anymore though, not sure where it even went!
-
Not sure if Weltmeister sells them direct ,but they do make them there. If you are in the us I can order them for you, Otherwise any weltmeister dealer should be able to order them for you. In general I found the price more reasonable than Hohner.
-
Just a quick bump to this thread ...
I went ahead and ordered quite a few sets of replacement bellows from the site mentioned above (as I'm now on my 4th set for one box I'm starting to see bellows as a disposable item like guitar strings!)
The chap that makes them is called Igor šolinc - his English is very good and he's happy to discuss what is needed, including trying to match the correct corner angle and colours/tape types. He takes PayPal as payment and it's one price for any size bellows. Mine took about 3 weeks from ordering to arriving.
The bellows look to be very good quality - although I've found that you can only really tell that over time! The one notable thing is that they didn't seem very stiff to start with which is a positive over other new bellows I've had in the past.
If you're thinking of ordering from him you need the following info:
********************************************
Width & height in mm
Fold depth in mm (usually 24mm for melodeons)
Number of folds (bellows makers count the number of peaks including the two ends to be glued to the frames)
Bellows corner type (this is the trickiest bit to get right - but he has some examples on his site and you can email him picures and diagrams)
Bellows tape colour and type
Canvas colour
Leather corner colour (Black or white)
************************************************
I'm currently in the process of glueing them on their respective instruments one by one and they play very nicely!
Cheers
Squeezy
-
How much did they cost, out of interest? Including shipping and so on. My Preccy could do with a new set.
-
I bought 5 sets!
The cost to me was €125 per set plus €55 shipping.
If you buy one set it costs €130 plus shipping ... I don't know what that is to the UK for one set, but it's probably somewhere around €15-20
Cheers
Squeezy
-
Hmmm. Hope their packaging has improved. My set was doa.
I'll say no more.
-
I've seen guitar strings at a lot more than this.
eg I shudder to think what Martin Simpson might pay out ::)
-
Not a bad price by any means.
-
I've used a couple of sets. The finish is not quite as neat as Italian made, but quite serviceable.
-
Martin Simpson rarely pays fpr a guitar pet alone strings. Mr Endorsement.
Admittedly have not tried these bellows but no doubt better than the rip off set I got from an American "daeler/repairman" who claimed his Harmonika bellows "were better than Italian made belolows in many wyas".. He never did tell me whT was better about nthem considering :
The sides were not parallel
Materials were cheap
Pleats uneven
Side not the same length
Etc
And this does not take into account they were more than Italian bellows.
Oh , did I mention they were not the size ordered, not the color ordered and did not fit Hohners as promised?
But, what do you expect from someone who refuses to return your prototype fingerboard. ?
I'll take a chance... thanks for the info
-
You name him online (having double checked your facts and records)
-
Martin Simpson rarely pays fpr a guitar pet alone strings. Mr Endorsement.
As Chris said.
I would seriously check your facts before posting!
Not only does Martin pay for his guitars but he pays for has strings as well.
Andy
-
I don't think there's very many trad musicians getting anything free in the instrument department...
-
I don't think there's very many trad musicians getting anything free in the instrument department...
Someone gave me a Delicia Popular last week - not impressed :(
-
Someone gave me a Delicia Popular last week - not impressed :(
Quick, pass it on before the music stops.....
-
I got a bellows replacement from Igor šolinc - good price, prompt service, and a hell of a lot easier than trying to make them yourself. No complaints at all.
Nigel
-
Someone gave me a Delicia Popular last week - not impressed :(
Better not leave it on the back seat of your car then Rees, somebody might break the window and chuck in a few more... 8)
-
Someone gave me a Delicia Popular last week - not impressed :(
Better not leave it on the back seat of your car then Rees, somebody might break the window and chuck in a few more... 8)
And a banjo.... >:E
-
Calm down, I've burnt it ;D
Back on topic - I think I might try a couple of these here bellowses.
-
I too have tried these, and I must agree with the chorus: Good quality, and fast service.
Also, better communications than the big Italian makers, it appears. Not the same quality as Galassi, but good price, and it appears that he makes fewer mistakes - a friend ordered 4 bellows from Galassi, and at least they got one of them right...
I just placed my second order with Igor, and again: good communications, and hopefully a good set of bellows on the way - no complaints about the last I got, apart from being stiff for a long time. Just play the darn thing, and it works great:)
-
What do bellows from Galassi cost, anyway? I asked my repair guy about a new bellows for my Louis Miller and he said whoever he got them from Italy would charge about $700, which is more than the box cost. Certainly they do great work, there are some samples provided by Peter Unbehauen in this thread on Galassi custom bellows - Reyes Accordion & Bajo Sexto Forum (http://www.reyesforo.com/post/galassi-custom-bellows-1185113). But I just want something plain jane that doesn't cost a mint, and will definitely go to Igor for both the Miller and my Gaelic IVS at some point. At around $200 with them attaching the bellows to the frame for free there's just no competition out there, far as I can tell.
-
Don't know whether these are Galassi, but Theo orders from Italy and is selling at £205 - £225. Assuming a normal mark-up by way of retail trade, that doesn't make them much more expensive at cost, but I don't know whether the makers accept orders for a single item unless you are a trade customer.
http://www.theboxplace.co.uk/purchase/bellows/cat_12.html
Incidentally, although I assume that all those who are interested have already seen it, the ebay listing shows a choice of canvas colour, tape colour and corner styles. I suspect that Igor would be the easiest maker to do business with if you require something unique, such as graphics on the card or a personalised emblem incorporated into the taping, particularly as he offers to mount them to your frames before delivering. That also takes care of the packaging issues, as you'd need to send the frames in a suitable box. When I sent a whole reed block to Theo, I used a Tupperware cake box with plenty of foam inside.
Rob.
P.S. Some plastic boxes are more brittle than others. Try flexing them to see whther they'll take the knocks!
-
I've had several bellows from Igor and the quality is reasonably good, but I think Galassi or Marconi are better. But f you want a response to a request for a single set of bellows Igor is quicker.
-
... When I sent a whole reed block to Theo, I used a Tupperware cake box with plenty of foam inside.
Not sponge, then?
-
Perhaps that would have been better - a little bit of bribery... But then you've never had to stomache my cooking!
Rob.
-
Marconi Bellows - mantici per fisarmoniche - accordion bellows (http://www.marconi-bellows.it/frameset-en.html)
Galassi Bellows > Company > History (http://www.galassi-bellows.it/eng/azienda_storia.html)
Which do you get the £225 jobs from, Theo? And in what way is their work superior - are the bellows from Igor not fully airtight or flexible, or is it just that the Italians' work is neater/more varied/complex?
-
I've bought 5 sets of bellows from Igor about 2 years ago to replace on my main workhorse Saltarelles in the band and I have gone through 3 sets of them! They're certainly not as strong as the Galassi ones I've had in the past - but are considerably cheaper to be fair. I found that they began to go with bellows corners popping off much more readily than they have on my other bellows.
That's not to say that they're not good bellows ... on one of my much less thrashed boxes they are still in perfect nick and as airtight as you could wish. If anything Igor's bellows are more flexible from new than Galassi ones ... but they are not as hard wearing. I would recommend them for any application apart from hard regular gigging (or morris playing!)
-
Thanks for more details, squeezy. I managed to work a screw loose on the bass strap of my Trichord tonight, that's about as destructive as I've gotten with any accordion, even though I throw 'em around a bit; so Igor might be up my alley here.
Ever try a backpad? My Gaelic IVS definitely could have used one, you can see plenty of wear from decades of rubbing against someone's shirt/coat buttons. But if you're working corners loose that's another ball of wax.
-
I have a couple of 120 PAs that need new bellows. I'm going to try the Slovenian ones. I'll let you know how I get on.
-
Bumping an old thread...
Just to say that I decided to order a replacement set of bellows from Igor for a Hohner Club Modell II. After a quick e-mail exchange and sending dimensions, bellows tape type and colour etc., I went ahead with my order. Igor quoted a turn-around time of about 10 days. The order went in on 18th July and my postman delivered them to me this morning - 13 days overall. Total cost €130 + €20 shipping - very reasonable and in such a quick time.
The bellows look to be very good, definitely more sturdy than Hohner bellows. A bit stiff at first as you might expect, but I am sure they will loosen up nicely.
Good service, looks to be good product. (:)
-
Back .. a while ago Igor made me two sets of bellows..one for a PA and the other for a Lilliput. The fold depth on the Lilliput was a bit of a worry (it was a mm or two deeper than the original) but as hard as I tried I couldn’t get the reeds/valves to foul it on the bass side, so I concluded it was ok. A Liliput with new bellows is...er..quite nice.
-
Igor made me a set of bellow for an HA114 a couple years ago. They're great, they improved the instrument considerably. Turnaround was reasonably quick, price was decent. I recommend him.
-
I have ordered some sets from him. He is great to work with and does an excellent job.
-
Igor made me a set of bellow for an HA114 a couple years ago. They're great, they improved the instrument considerably. Turnaround was reasonably quick, price was decent. I recommend him.
What was it that improved the instrument? I’m curious, as I don’t find the Hohner HA114 bellows an issue at all. I assumed replacement bellows would just look nicer and have better quality tape, but couldn’t really see how they’d affect performance.
-
Just to be clear,
Is Igor the chap who deals on Ebay under the name Allforacordio? I am about to order a set, and whant to get the correct maker?
Thanks Dave
-
Just to be clear,
Is Igor the chap who deals on Ebay under the name Allforacordio? I am about to order a set, and whant to get the correct maker?
Thanks Dave
Yes - it's the same person. But I think you are better off ordering from him directly. You won't have e-bay fees factored into the price for a start.
I've ordered bellows directly from Igor, via e-mail and his website. The order form allows you to specify the dimensions and other options, such as bellows corner type and bellows tape type. Igor is quite good to communicate with via e-mail. His English is a little idiosyncratic, but perfectly understandable.
http://vsezaharmoniko.com/index.php?route=common/home
-
Thanks Steve, I will contact him directly as you suggest.
-
Anyone know what has happened to Igor? His website is not working and his bellows don't appear on eBay any more.
-
Anyone know what has happened to Igor? His website is not working and his bellows don't appear on eBay any more.
I was given his email in this thread http://forum.melodeon.net/index.php/topic,23700.0.html#lastPost
Address also.
I haven’t tried contacting him yet for my project, so if you do and are successful please let us know :||:
-
If you can get a translation, is this any use for you?
https://www.facebook.com/igor.solinc
He apparently works for
https://www.facebook.com/vsezaharmoniko/
-
I received an email from
DiatoniÄna Harmonika Rihard this morning.
"Hello,
yes we delet our web side becaus we have too much work
Yes we can make bellows no problem...
price for all bellows is 250 € whit shipping....
have a nice day"
-
Is it my imagination, or is this a big increase?
-
Yes it’s now n a par with Italian. Igor probably came to realise he was working for next to nothing.
-
This is surely a common phenomenon! Price your service/product at a price which will allow you to be competitive enough to scrape a living....eventually becoming too busy to have any sort of "life", and then raise your prices to reduce your workload to a more manageable level whilst hopefully still making enough to survive.
Voila!
-
Funny old world, I used to overprice jobs I didn't really want, and still got them ;)
SJ
-
price for all bellows is 250 € whit shipping....
yes a BIG increase.the last set I bought was about 150 Euro's, there pretty good bellows but as Theo says now not much cheaper than Italian made ones.
-
Set of Chinese made bellows from Charlie £115 :||:
SJ