Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Keithypete. on July 11, 2012, 12:15:43 PM
-
https://picasaweb.google.com/103571715539757100098/WorkInProgress?authkey=Gv1sRgCIaU5Lmk5NqC1gE
The link should take you to some pictures of a working prototype keyboard for the Pokerwork I am fettling, after a fashion.
At the moment I am using bakelite for the actual finger plate, which is what Beltuna have used on the Sara II. Or it is something very similar. I have a different product in my mind for the finished article.
(lBTW - Refurbishment of the bellows is proving tedious in the extreme.)
-
(lBTW - Refurbishment of the bellows is proving tedious in the extreme.)
One of the truisms of melodeon maintenance
-
Any reason why the corners are so sharp?
-
The reason the corners are so sharp is simply that this is a working prototype, a testbed if you like for certain ideas, processes & techniques. That and the fact that it just isn't finished yet, in terms of the design & nothing is 'finished' as in harrised. Hopefully the finished article will be a lot better. No - the finished article WILL be a lot better!
-
I might recommend you contact XXXXXXX XXXX
and get my prototype Hohner 2 row prototype suitable for both Erica and Pokerwork.
-
KP: what is on the inside? nothing wrong with current keyboards on the outside....
-
How did you make the holes able to take up the button movement, are they just bigger round ones - was talking to lester about this a while back and he pointed out the originals are actually Oval
-
KP: what is on the inside? nothing wrong with current keyboards on the outside....
Apart from the keys themselves there's nothing inside. Hollow.
How did you make the holes able to take up the button movement, are they just bigger round ones - was talking to lester about this a while back and he pointed out the originals are actually Oval
I'm not sure why the original Pokerwork keyboard has slots wit two parallel sides and round ends. They don't seem entirely necessary. The holes are oversized at the moment, but will be suitably smaller on the finished product.
I suppose there isn't anything wrong with the original design as such, I just find it a bit naff. I'm also thinking of something quite exciting for the fingerboard of this 'Box. Watch this space, as they say!
-
I don't think it is essential to have oval holes, they just allow for less precise positioning of the keyboard relative to the buttons. Most (all?) other Hohner models such as Clubs for example, have circular holes.
-
The Primatona has round holes. The GDR 3 row I have also has slots ,although they are shorter than those on the Hohner .
-
I don't think it is essential to have oval holes, they just allow for less precise positioning of the keyboard relative to the buttons. Most (all?) other Hohner models such as Clubs for example, have circular holes.
Most of the clubs tend to have removable top fingerboards and less travel on the button mech so I guess its easier to make things lineup, same for the Corona classics, early Corsos, Ouvertures etc.
-
Control of the button travel is they key modification, but with the (easily) removable fingerboard, putting in a pad or the 2 level pad (like Dancemaster's) should be easy.