Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: henrikfan on October 21, 2008, 07:05:16 PM

Title: DIY Bellows pliers
Post by: henrikfan on October 21, 2008, 07:05:16 PM
Hello

     Top tip for cheapo bellows pliers.....drill a small hole on the end of nail clippers....works great.

Henrikfan
Title: Re: DIY Bellows pliers
Post by: Theo on October 21, 2008, 07:20:56 PM
Hmm,  good idea, but there is a projecting hard edge at each end of the cutter, take care not to cause scratches!
Title: Re: DIY Bellows pliers
Post by: henrikfan on October 22, 2008, 12:30:34 PM
Hmm,  good idea, but there is a projecting hard edge at each end of the cutter, take care not to cause scratches!

Yes, I see what you mean....I ground the edges off....not perfect but works for me.
(http://img232.imageshack.us/img232/4636/ground3ky7.jpg) (http://imageshack.us)
[IMG]http://img232.imageshack.us/ (http://g.imageshack.us/img232/ground3ky7.jpg/1/)
SimplePortal 2.3.5 © 2008-2012, SimplePortal