Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Prettying up a Pressed Wood  (Read 1231 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Prettying up a Pressed Wood
« on: October 26, 2012, 05:38:33 PM »

I have a pre-war-ish pressed wood Hohner project box. The casework, although not in bad shape, is looking a bit dull and sorry for itself. I just saw a pic of a Hohner PA, restored by Martyn, all bright and sparkley.

So I wondered - after the obvious damn good clean, what's best to bring the woodwork back to looking nice?

Wonder what the original finish was. Don't think it was oil, maybe a lacquer? Or just varnish?

Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Prettying up a Pressed Wood
« Reply #1 on: October 26, 2012, 11:13:52 PM »

I think this is the one, showing before and after photos.

The finish used by Hohner on boxes of this period seems to be mostly, but not always a spirit based varnish. As this is not a particularly tough finish a bit of care is needed in the cleaning and polishing process...particularly if it has perished (which in this example was reviving the existing finish on the main part of the box).

I first used a wax and polish remover NOT a stripper. I then coloured out with pigments and fixed with French polished the damaged and worn areas. When this had fully hardened burnished the whole body with a burnishing cream and for added protection it was wax polished. The keyboard was rubbed down and  polished with a black French polish and cut back with 4/0 steel wool and wax.

Martyn 

« Last Edit: October 26, 2012, 11:19:36 PM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Prettying up a Pressed Wood
« Reply #2 on: October 26, 2012, 11:23:52 PM »

Thanks Martyn, that's the one. From the photos, looks like new. Hope the grandfather's pleased - terrific job.

I have some French polishing to learn for a couple of concertinas, hadn't really thought about it for melodeons.

PPS - one tends to think of a Pokerwork gold finish, is that what's there or is it stained wood and black?
« Last Edit: October 26, 2012, 11:30:44 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Prettying up a Pressed Wood
« Reply #3 on: October 27, 2012, 11:29:16 AM »

Thanks Martyn, that's the one. From the photos, looks like new. Hope the grandfather's pleased - terrific job.

I have some French polishing to learn for a couple of concertinas, hadn't really thought about it for melodeons.

PPS - one tends to think of a Pokerwork gold finish, is that what's there or is it stained wood and black?

On this particular model they have used a type of black paint and a tinted spirit varnish rather than staining the wood. I'm not sure how the black is applied...perhaps screen printed or a stencil of some sort.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal