Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows Repair  (Read 2307 times)

0 Members and 1 Guest are viewing this topic.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Bellows Repair
« on: February 03, 2013, 05:48:35 PM »

I'm refacing the bellows of my 1920's Hohner with new buckram - primarily the casing, but also a few strips of bellows tape. The old buckram comes off fairly easily as it is old & dried out. It tends to leave a papery layer behind. I'm in two minds whether to scrape this off or leave it on. It's pretty thin, so I doubt it will be visible under the new buckram. Removing it is a lengthy & messy business & runs the risk of damaging the fabric layer of the bellows. Any opinions?
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Bellows Repair
« Reply #1 on: February 03, 2013, 06:50:33 PM »

H'mm......my head says leave it and no-one will notice; my heart says clean it all off and do a "proper job" - you'll sleep more soundly for it.  Seriously, every time I've done a "quickie" (not just on melodeons, but other instruments, furniture, house renovations and whatever else) it's always niggled at me every time I looked at it until I stripped it all out and did the proper job I should have done in the first place.  Maybe that's just me, though..........

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Bellows Repair
« Reply #2 on: February 03, 2013, 07:54:36 PM »

The quickie way to do it would be to remove the ends of the tape over the metal corners and cover the rest with new wider tape to completely conceal the original worn tape. It certainly works with thin paper tape but I'm not sure about what you have there.

Peeling off what you can and just taping over the rest is crude and lazy. It'll look bad and might also lead to problems with adhesion if the surface is uneven and isn't clean and free of loose debris, old glue, etc. If you're not going to do it properly then you shouldn't really be doing it at all IMHO.
« Last Edit: February 03, 2013, 07:57:21 PM by Andy Simpson »
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Bellows Repair
« Reply #3 on: February 03, 2013, 08:41:23 PM »

Fully agree with both the above.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Repair
« Reply #4 on: February 03, 2013, 11:15:14 PM »

You certainly want to remove anything loose from under the old tape.  If the papery residue is old glue then what sometimes works us to sand it smoothe with a medium grit abrasive paper. That may be enough to produce a smooth, firm foundation for the new tape.
Another tip is to make the new edging tape a little wider than the original which will cover any marks left by dirt and glue along the edges if the old tape.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Bellows Repair
« Reply #5 on: February 04, 2013, 04:44:11 PM »

Not talking about the bellows tape, but the bellows "casing" - I'm pretty sure that the thin papery residue left would not show underneath the new layer of buckram & the glue would saturate through to create a firm bond ... but, I DID scrape it all off. Also tried dampening the paper residue - it then scraped off very easily, but caused the underlying glue to become soft & sticky ... which was kind of unpleasant, so I reverted to just scraping with a blade & sandpaper.

Applying the buckram was quite tricky - basically "upholstering" the box. I wasn't sure which was the best way to go about it. In the end I applied it in one strip all the way around the box, aligning & gluing the edge along the bellows first & then wrapping around the rest of the casing. I used a quick-drying white glue, which has the advantage of holding fairly fast after about a minute or so - so no need to clamp. It looks pretty good. The other side should be easier with the experience gained from doing the first side!
« Last Edit: February 04, 2013, 04:45:54 PM by AirTime »
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Repair
« Reply #6 on: February 04, 2013, 04:53:10 PM »

A picture is worth a thousand words!

Understood, but the general point still hold about removing everything loose from the substrate before gluing.  That way you get the buckram tightly held, and no unsightly bulges or bubbles.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal