Hi all,
I realise a clacky keyboard is a lovable feature of the box but a (very) well used Corona II ADG I recently got off Ebay had just one or two keys that were reminiscent of someone using coconut shells to do clip-cloppy horse sound effects.
When I had it to bits I could see that the felt strips under the buttons had pretty much squashed down to nothing under eg the G note on the G row so there was no cushioning left and I had something like a tocky percussion box thing going on.
A forage through the utility room unearthed an old mountain bike 2 inch inner tube. I cut it to length and widdled it along under the keys, then secured it with a drawing pin at each end. The width of the tube was just the right size to go under the three rows of buttons. I dithered about cutting the tube length-ways so I only had a single layer of rubber but the double thickness didn't seem to interfere with the button travel - gives a little bit of 'weight'/resistance right at the end of a push.
I usually approach any job that requires me getting my tool kit (ie BOTH screwdrivers) out with the absolute and certain expectation of failure but I'm rather pleased with this.

Thanks to all for the many answers to all the other questions I had but didn't need to ask.
xx