Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: liliput reeds  (Read 1857 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
liliput reeds
« on: January 13, 2009, 08:43:35 PM »

Are the reed plates in a liliput normal size?
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: liliput reeds
« Reply #1 on: January 13, 2009, 08:55:44 PM »

No
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: liliput reeds
« Reply #2 on: January 13, 2009, 09:09:16 PM »

For example, just measured the low C/D on a Liliput at approx 38mm - "normal" one is approx. 43mm long
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: liliput reeds
« Reply #3 on: January 13, 2009, 09:30:52 PM »

The treble reedplates are also narrower than usual but the spacing between the reed tongues is the same.  I have successfully filed down the width of ordinary Hohner reedplates of the same age to make replacement Liliput reeds.  The result was good, the sound was the same.  It is a lot of work though, I would only want to do it for the occasional replacement.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal