Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed Tuning  (Read 2486 times)

0 Members and 1 Guest are viewing this topic.

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Reed Tuning
« on: June 09, 2013, 08:10:30 AM »

Can anyone advise why some reeds sound whilst in the melodeon, but make no sound, or only odd squeaks when on the tuning table? Only seems to occur at the high end.
Also, why some reeds cause the (Dirks) Tuner to fluctuate backwards and forwards through a range of notes?
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Tuning
« Reply #1 on: June 09, 2013, 11:02:50 AM »

, or only odd squeaks when on the tuning table? Only seems to occur at the high end.

It suggests you tuning rig is not supplying air at the same pressure and in the same volume as inside the instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Reed Tuning
« Reply #2 on: June 10, 2013, 05:59:03 AM »

After more fiddling about, and taking into account Theo's response, I find that by slightly propping the reed block away from the tuning bed (thereby allowing some air to escape) I get proper sounds - the change in air pressure/volume made the difference, although it might mean that I have a leak under thr reed block in the instrument?
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed Tuning
« Reply #3 on: June 12, 2013, 12:43:14 AM »

More than likely you're getting more pressure on the bench than in the instrument, making the reed "choke".  Small boxes tend to suffer this if played too loud - usually the basses first, but a single voice instrument can suffer it on the treble side if all the airflow is going through one reed.  The main part of the setting of the reeds is to get them all to sound at the same pressure so that the response is even all along the keyboard, cheaper boxes often fail in this respect and cannot be played quietly as some notes will fail to sound.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Tuning
« Reply #4 on: June 12, 2013, 07:39:56 AM »

But Rob, the OP says that the reeds are ok in the instrument, so what you are saying is just to illustrate the problem can happen elsewhere.

It would be helpful to know what you are using to supply air to the tuning bench?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Reed Tuning
« Reply #5 on: June 12, 2013, 09:20:53 AM »

Hi Theo
Air is supplied by bellows from an old Pokerwork, sealed at base, and with plywood top with holes -see photo - I wonder if the thickness of the plywood (18mm) might make the air flow through the delivery holes in such a way as to influence the reeds firing? No matter how softly I apply the bellows, or how hard, the top-end reeds wont sound, unless I prop the reed block up (about 1mm).
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed Tuning
« Reply #6 on: June 12, 2013, 09:36:20 AM »

It is quite common for the highest reeds in pokerworks to have a hole through the wax to allow air to escape to prevent the reeds choking which seems to be a similar effect/cure to the one you are suffering from?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Tuning
« Reply #7 on: June 12, 2013, 09:47:45 AM »

The photo seems to show that you have valves on the highest reeds - this is not usual and will make it more likely that the reeds will choke.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Reed Tuning
« Reply #8 on: June 12, 2013, 10:27:05 AM »

The photo shows reeds from another renovation project - a 3-row Heligonka - ex eBay - I will remove the valves from the top 3 reeds (and turn them upside down?). The D/G Pressedwood has no valves on the top two reeds. Lester's comment re relief hole indicates that too much air/pressure on small reeds is a problem, as Theo initially advised - anyway, I can now do the job, so thanks for the input.
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Reed Tuning
« Reply #9 on: July 02, 2013, 10:08:19 PM »

I think your rig may be introducing harmonics that may be choking the note. Try to duplicate the dimensions of the accordion valve holes as closely as possible. The 18mm hole the air is coming through may be acting as a tuning pipe.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal