Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning Non-removable reedblocks  (Read 1637 times)

0 Members and 1 Guest are viewing this topic.

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Tuning Non-removable reedblocks
« on: August 13, 2013, 01:51:51 PM »

What's the trick to tuning non-removable reed blocks?

I guess the part I'm more concerned with isn't the tuning but sounding the reed after its adjusted. The bass reed blocks on the left side of my accordion are glued onto the soundboard. After a reed has been adjusted the only way I can think of to sound the reed to check the tuning is to put the accordion back together and play it, then disassemble it and re-adjust the reed.

I imagine there is a trick I'm missing that would let me sound the reed without having to put the whole thing back together. Would one unglue the block from the soundboard so that it can be used on a tuning table and then glue it back once everything is tuned up?
Logged
Sean McGinnis
Bordentown City, NJ, USA

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tuning Non-removable reedblocks
« Reply #1 on: August 13, 2013, 03:10:08 PM »

What's the trick to tuning non-removable reed blocks?

I guess the part I'm more concerned with isn't the tuning but sounding the reed after its adjusted. The bass reed blocks on the left side of my accordion are glued onto the soundboard. After a reed has been adjusted the only way I can think of to sound the reed to check the tuning is to put the accordion back together and play it, then disassemble it and re-adjust the reed.

I imagine there is a trick I'm missing that would let me sound the reed without having to put the whole thing back together. Would one unglue the block from the soundboard so that it can be used on a tuning table and then glue it back once everything is tuned up?
You need a tuning bellows/table which has a large opening just slightly smaller than the open end of your accordion. Lay the complete end assembly over the opening and you can sound the reeds using the table bellows rather than your instrument's bellows.

Alternatively you can make a ']'-shaped frame where the legs of the frame just fit inside the exterior valley fold of your instrument bellows. Suspend your bellows and the bass end from the frame and hold the treble end on top. Operate the bellows in the normal way to sound the reeds.

I'm sure Lester or Theo have a link to a photo of this somewhere on this forum.

Edit:
Here's the link to Lester's photo.
« Last Edit: August 13, 2013, 03:13:27 PM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning Non-removable reedblocks
« Reply #2 on: August 13, 2013, 03:13:57 PM »

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tuning Non-removable reedblocks
« Reply #3 on: August 13, 2013, 03:15:20 PM »

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Tuning Non-removable reedblocks
« Reply #4 on: August 13, 2013, 03:28:25 PM »

Thank you, I'll give that a try.
Logged
Sean McGinnis
Bordentown City, NJ, USA

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Tuning Non-removable reedblocks
« Reply #5 on: August 16, 2013, 03:00:31 AM »

I gave it a try. Here's my fixed reedblock tuning bench

P.S. It worked. I was having trouble getting my new bass reeds to sound so I trying to find out what was stopping them. I think there was just debris stuck on the reeds (oops!) but this setup along with a roll of scotch tape to block individual reeds was very helpful for fixing the problem.
« Last Edit: August 16, 2013, 01:47:42 PM by deltasalmon »
Logged
Sean McGinnis
Bordentown City, NJ, USA
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal