Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Celluloid question  (Read 1295 times)

0 Members and 1 Guest are viewing this topic.

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Celluloid question
« on: September 22, 2013, 03:55:00 PM »

Hi

I have a red Trichord (Corso style).

The Screw on celluloid on keyboard face is slightly curved. Nothing major, flat in the area of the buttons but curves gently down as it goes under the metal grill – just enough so that the grill can be pushed over the top of the small strip of plastic attached to the keyboard face for the purpose of preventing the grill being pushed in.

I understand that celluloid is a thermoplastic and am used to shaping/reshaping acrylic (also a thermoplastic) with ovens and strip heaters, but I can’t really afford to go about this through a trial and error processes. So any tips/advice welcome.

I do note that the keyboard face does not appear to be a single thick piece of celluloid - looks like 3 layers (thin –thick –thin)  Is the darker coloured middle layer also celluloid?

Thanks

Andy 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Celluloid question
« Reply #1 on: September 22, 2013, 04:09:50 PM »

Yes usually all layers are celluloid.  I think the safest method of heating celluloid (to avoid fire risk) is in a water bath.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Celluloid question
« Reply #2 on: September 22, 2013, 04:12:14 PM »

Yes usually all layers are celluloid.  I think the safest method of heating celluloid (to avoid fire risk) is in a water bath.
Concur, 8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Celluloid question
« Reply #3 on: September 23, 2013, 05:31:48 AM »

I have had good luck with a hair dryer set on high. set the part you are working on on a smooth flat surface like wood or cardstock with a firm backing like a table top. you will want a smooth piece of wood to use to press it flat as you heat it.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal