Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass end for Double Ray Deluxe.  (Read 1510 times)

0 Members and 1 Guest are viewing this topic.

nzsheepfarma

  • Member
  • *
  • Offline Offline
  • Posts: 8
Bass end for Double Ray Deluxe.
« on: March 17, 2014, 11:49:32 PM »

Hello everyone, I have recently been very fortunate to be given to me a Hohner Double Ray Deluxe B/C black dot from the daughter of the original owner who passed away many years ago (1960's) and are family friends.I doubt if it has been played very much since and thinking back it is possibly a late 1950- early 1960's model.
When standing on its feet the word HOHNER is horizontal on the bass end and the lettering is gold edged with black infill. It also has the black dot/sunray and swastika/music note (as referred to elsewhere in the forums) emblem on the bass end. The treble end is wooden with a red pearloid cover. Everything plays well and to me everything is in very good condition.
 I very much like the sound of this melodeon but unfortunately it has got old fastioned Hohner layout for the 8 basses which  are not much use for playing in other keys. (also referred to elsewhere in the forum discussions).
I have read the wealth of information available here on the forum about fitting Hohner Student/Amica/Bravo/La Davina 48 bass ends. Another option is to replace the reeds or retune to either the traditional/ modern layout. Is this difficult to do?
Another option would be to purchase a 12 stradella bass end complete with reeds that would fit onto my Double Ray which would be a big improvement on what I have already got although my aim is to eventually purchase a B/C/C# Trichord.
I would appreciate any advice that members may be able to give.
Thanking you.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Bass end for Double Ray Deluxe.
« Reply #1 on: March 18, 2014, 12:03:25 AM »

Hi nzsheepfarma,

I have a 12-stradella-bass left hand side from a red Hohner Trichord that I think will fit your Double Ray deluxe body.  You may have to trim the bellows frame, plug and re-drill the bellows pin holes, tweak the bellows gasket -- but it will be a closer fit than most Hohner PA left hands.

I bought this from another melnet member a few years ago, but never found a good use for it. It is in the same condition as when I bought it, which is workable but definitely "used" in appearance. It does include all the reeds, blocks, and mechanism. I would trade it for the 8 bass left hand you have if you cover the costs of postage for both shipments and if yours is in condition equal to mine. Or if you'd rather just buy it I would consider a reasonable offer. 

PM me if you'd like me to get this out and take some photos.

Paul Groff
Miami, Florida, USA
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Bass end for Double Ray Deluxe.
« Reply #2 on: March 18, 2014, 10:51:08 PM »

Paul, if that's the bass end I'm thinking of, there are three photos here:

http://www.wgwyoung.co.uk/Trichord_bass.htm

I'm sure a Trichord bass end would be a direct fit to the Double Ray Deluxe bellows, with possibly the bellows pin locations needing adjusted. The Double Ray Deluxe/Corso/Corona/Trichord models all have 310 x 190mm bellows.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Bass end for Double Ray Deluxe.
« Reply #3 on: March 18, 2014, 11:12:40 PM »

Hi Bill,

Thanks very much, that's the one!  Never used here since it arrived.  I agree it should be the correct size, but may need a little attention to those fine details of fitting and airtightness.

PG
Logged

nzsheepfarma

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Bass end for Double Ray Deluxe.
« Reply #4 on: March 19, 2014, 12:17:15 AM »

Thank-you Bill for the photos and information.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal