Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: paddy richter tuning for single row melodeon  (Read 1485 times)

0 Members and 1 Guest are viewing this topic.

ayreforcepyper

  • Member
  • *
  • Offline Offline
  • Posts: 20
paddy richter tuning for single row melodeon
« on: January 09, 2013, 03:28:05 AM »

Just wondering if anyone has ever tried using a paddy richter tuning scheme on a single row, and if this would have any benefit?
Logged

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: paddy richter tuning for single row melodeon
« Reply #1 on: January 09, 2013, 08:16:31 AM »

No, haven't tried it but an interesting thought. I think that players who want the low 6th of the scale would usually retune the pull note on button 1. A cheap way of seeing if Paddy Pichter meets your requirements would be to play a Paddy mouthorgan for the melody, accompanied with the melodeon basses and see if you like how it sounds. Try before you file, as it were.
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: paddy richter tuning for single row melodeon
« Reply #2 on: January 09, 2013, 12:17:04 PM »

I had this mod done recently on my Hohner 1040 single row in G, by master builder Peter Hyde.

The lowest pull was raised from D to E. I like it.
Logged
Harmonica Player
Just starting with the Box

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: paddy richter tuning for single row melodeon
« Reply #3 on: January 09, 2013, 12:49:31 PM »

It's a common modification, particularly amongst the players of Irish music on the one-row melodeon.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

ayreforcepyper

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: paddy richter tuning for single row melodeon
« Reply #4 on: November 30, 2013, 12:59:45 PM »

Been thinking about this again lately...would it be possible to get a C natural on one of the repeated A's (D single row) in order to get the whole G scale?  Is it even possible to get that reed in the right pitch to fit in the G scale that is available on the one row D? 
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: paddy richter tuning for single row melodeon
« Reply #5 on: November 30, 2013, 04:12:19 PM »

I think it's possible as My Beltuna one row in D had a B on the pull on button one that was one octave higher than it should have been, so fifth button pull and first button pull where the same octave. I'm pretty sure you could put a C nat. there but IMO
this might be a stretch to get to and to get a good back and forth rhythm that is what gives a one row it's character. plus I find a lot of tunes have the low B. And if you did put a C nat. there I would think you want it one octave up since the G scale starts on button 4 pull.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal