Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Making a pokerwork keyboard lay flat  (Read 2302 times)

0 Members and 1 Guest are viewing this topic.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Making a pokerwork keyboard lay flat
« on: December 08, 2013, 08:20:22 AM »

Following on this thread,
http://forum.melodeon.net/index.php/topic,13700.0.html

Can it be done? I see three challenges: the first is getting the angle of the keyboard cover's leading edges shaved down correctly so it sits 90 degrees the body; the second what to do with the threaded sockets; the third is how to raise the lever height of the lower step.

Might be an easier job with a wooden keyboard cover than with a plastic one. Has anyone tried this?

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Making a pokerwork keyboard lay flat
« Reply #1 on: December 08, 2013, 09:30:10 AM »

My immediate question is - why would you want to do this? Apart from one-rows, most melodeons have the keyboard at a slight angle; it makes it easier to reach the inner row buttons without accidentally hitting a button on the outer row.

But yes, I expect it could be done if you were determined enough to do it. There would be have to be quite a radical modification of the lever arm angles in order to get the buttons sitting at the right height. On Pokerworks, the lever arms can withstand a certain amount of judicious bending; it is usually necessary to do this if the pallets have been re-faced in order to accommodate the changed thickness of material. But whether they could be bent sufficiently to work with a keyboard at 90°, I don't know.

There would have to be a very good reason indeed to justify modifying a keyboard in this way.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making a pokerwork keyboard lay flat
« Reply #2 on: December 08, 2013, 09:57:38 AM »

Following on this thread,
http://forum.melodeon.net/index.php/topic,13700.0.html

Can it be done?

Yes, it is easy - just break the keyboard.   :'(

But seriously, just forget the idea.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Making a pokerwork keyboard lay flat
« Reply #3 on: December 08, 2013, 10:40:11 AM »

I don't play accordions with flat keyboards, all of mine have a step, or incline as with a pokerwork. It occurred to me that while a lot of people convert them to half step tuning for Irish music, I hadn't ever seen anyone modify the keyboard angle.

Idle fascination, I'm afraid  ::)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making a pokerwork keyboard lay flat
« Reply #4 on: December 08, 2013, 11:51:05 AM »

I think you are confusing two things.  A "flat" keyboard as often favoured by players of semitone boxes, does not mean that the keyboard is a right angles to the keyboard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Making a pokerwork keyboard lay flat
« Reply #5 on: December 08, 2013, 06:39:42 PM »

I know it's a flat surface as opposed to an open step. But weren't players of the Morgane complaining that its flat keyboard was still slightly stepped?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making a pokerwork keyboard lay flat
« Reply #6 on: December 08, 2013, 09:04:36 PM »

Perhaps, but is that relevant? The Morgane has a completely different design of keyboard with mushroom shaped buttons.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Making a pokerwork keyboard lay flat
« Reply #7 on: December 08, 2013, 10:34:20 PM »

Well, I'm aware of that and I dont have a problem playing either keyboard, personally. After looking at the busted one from the other thread, it seemed odd that with all the homebrew modifications one can think of doing to a small accordion, I could remember plenty of people protesting the slight step of the Morgane or pokerwork but no one trying to fix it. If I took issue with it then I would just cope or buy a different accordion. But I also like to tinker. Hence this thread. It's probably more realistic that it doesn't bother people all that much or they buy instruments better suited to their playing style.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Making a pokerwork keyboard lay flat
« Reply #8 on: December 08, 2013, 10:50:46 PM »

I don't really understand what you are trying to accomplish.  The pokerwork already has a flat (non-stepped) keyboard.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Making a pokerwork keyboard lay flat
« Reply #9 on: December 08, 2013, 10:58:48 PM »

There's definitely a problem with terminology here! There's a great difference between a keyboard with a slight backward rake in relation to the body (Pokerwork) and a keyboard with a slight backward rake in relation to the body and a step up in height between the rows (Morgane).

They cannot be bunched together as if the design is the same!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making a pokerwork keyboard lay flat
« Reply #10 on: December 08, 2013, 11:07:05 PM »

Yes I think we are talking at cross purposes. 
Hohners of the pokerwork/Erica family all have a keyboard that I would describe as a closed, flat design.  If the keys are set excessively high then the different geometry if the long and short levers means that they start to take on a slightly stepped appearance.  This seems to be more apparent with Chinese but Hohners, but it can happen with any.  But if the button height is set nice and low then there is no appreciable step.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal