Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Keybard to fit a 114, anyone?  (Read 2796 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Keybard to fit a 114, anyone?
« on: April 24, 2018, 09:17:58 PM »

Yes, I'm on the scrounge again!
I need a keyboard for my (keeper) HA114 in G. There's a big hole where the thumb strap rivet used to be, which I could have coped with if truth be told, but when I came to remove it, b****r! one of the screws snapped off flush in the captive nut. I don't have gear to attempt removing it, so I'm looking to replace it altogether.
Does anyone have such a thing spare, and which they might be persuaded to part with for a small sum?
The instrument is a keeper which was destined for the scrap heap before I managed to get hold of it, and I'm now doing a few modifications to it after Theo replaced half a dozen treble end reeds and corrected the treble tuning for me.
It's not pretty at all (thinking of Sir John's Liliput thread here) so the keyboard doesn't need to be perfect, just useable. Here's hoping!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Keybard to fit a 114, anyone?
« Reply #1 on: April 24, 2018, 11:23:21 PM »

Its a shame you didn't post this at the very start of the month Edward, I had a dozen tins of HoleGone looking for homes  :( Ideal for those plastic keyboards as you brush it on over the hole and it dries gloss black.  Still, as the man who regards duct tape as both structural and decorative ........................ >:E
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Keybard to fit a 114, anyone?
« Reply #2 on: April 24, 2018, 11:53:39 PM »

Edward- did the same thing to my pokerwork.  They sell something you can use to redrill the hole and then another thingamajiggy to rethread the hole- took a bit of muscle but I got it done and clearly by this post I am not the handy type...
Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Keybard to fit a 114, anyone?
« Reply #3 on: April 24, 2018, 11:58:39 PM »

Tap and die set! Or something equally ominous!
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Keybard to fit a 114, anyone?
« Reply #4 on: April 25, 2018, 12:09:36 AM »

In days of yore, I had all these bits and pieces of tools and loads of space in which to keep and use and them, also the skill and the temperament. Alas and alack, they are no more, hence I am reduced to begging on here. Please check your rubbish bins.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Keybard to fit a 114, anyone?
« Reply #6 on: April 25, 2018, 12:19:33 AM »

You should be on the telly, Greg! I couldn't envisage paying that much even for a new one.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Keybard to fit a 114, anyone?
« Reply #7 on: April 25, 2018, 03:34:11 AM »

This 114 being sold for spares. Not cheap but it says offers.
https://www.ebay.co.uk/itm/Vintage-Hohner-1-row-H114-Accordion-button-box-Accordian-Germany-as-is-Key-of-C/273141053178?hash=item3f9879b6fa:g:I3YAAOSwIWVY-PZm

This one has been on eBay for years, and the asking price is ridiculous (it used to be even higher if you can believe it!)

Edward, I did the same thing with the keyboard on my HA114. A tap and die set is the way to go! Spare keyboards for the HA114 don’t seem to be that common, so save this one if you can!
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Keybard to fit a 114, anyone?
« Reply #8 on: April 25, 2018, 03:38:43 AM »

Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Keybard to fit a 114, anyone?
« Reply #9 on: April 25, 2018, 07:06:33 AM »

I have a plastic keyboard for a two row with a repairable crack that you can have.  I think the outer row would match the buttons on a 114.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

arty

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1465
Re: Keybard to fit a 114, anyone?
« Reply #10 on: April 25, 2018, 07:53:11 AM »

Everything has a crack in it, that’s how the light gets in.... :( ....sorry!
Logged
Pre-Pokerwork C/F, Castagnari Laura G/C, Beltuna Sara 3 A/D, Castagnari Sander Special D/G

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Keybard to fit a 114, anyone?
« Reply #11 on: April 25, 2018, 08:27:05 AM »

Don't be sorry, arty! If I remember correctly, that's from the lovely Laughing Len; surely one of the greatest poets/songwriters of his generation, and always worth quoting.

Thank you Theo, I'll be with you post-haste!

mselic; I awoke during the night in a terrible sweat, dreaming that I'd bitten the bullet and ordered (and PAID for!!!!) one of those from the very same man! It was dreadful!

And.......thank you to the very generous person who offered to have a go at removing the broken piece for me, free of charge! (Obviously, I'll liaise, in hope, with Theo first.)

What a wonderful place Melnet is.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Keybard to fit a 114, anyone?
« Reply #12 on: April 25, 2018, 09:24:53 AM »

I have a plastic keyboard for a two row with a repairable crack that you can have.  I think the outer row would match the buttons on a 114.

Ah, that may not work.  The outer row of holes are the right distance, but of course there are 11 holes in place of 10, so it's not going to work easily.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Keybard to fit a 114, anyone?
« Reply #13 on: April 25, 2018, 09:48:12 AM »

Many thanks, Theo, it was worth a try.

Meanwhile; as one door closes, maybe another will open? I'm still looking if anyone comes across one that's been salted away.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Keybard to fit a 114, anyone?
« Reply #14 on: April 25, 2018, 11:00:18 AM »

You should be on the telly, Greg! I couldn't envisage paying that much even for a new one.

You do surprise me. I knew you'd be impressed  ;D

I thought of offering $7.95, but he is precious about overseas bids.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Bodgeon

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Keybard to fit a 114, anyone?
« Reply #15 on: April 26, 2018, 10:23:42 AM »

Edward, good to follow your scrounging attempts, from sunny Portugal. My workshop will be open for business in rainy Chester le Street in mid-May. Often fancied making a keyboard, could be a whole new lifetime occupation, if you haven’t already passed it on to some other expert!
Don’t get back till 16th May and might even make it to the North East Melodeon weekend, but I’ll be a beginner again.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Keybard to fit a 114, anyone?
« Reply #16 on: April 26, 2018, 11:27:35 AM »

Thank you Bodgeon, pm sent.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Johnnie Johnston

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: Keybard to fit a 114, anyone?
« Reply #17 on: September 25, 2018, 03:10:36 PM »

If you go to a Machine Shop supplier that supplies drill bits  you can get a LEFT HAND drill. I would use a 3/8 left hand drill  …

3/8 will be thick enough that when I grabs the bit won't break.. TO use just set drill to reverse put in bit and slowly start drilling..  When the bit grabs, make sure its sharp, the threaded piece that snap will let go and will screw out of the hole..

Doing it this way does not harm a thing and all you need is a new screw.. Pretty simple to do if you know how to drill.. Takes lone to put bit in drill than to remove it.. lol..

I have done the above many times as my trade as a tool-maker.

Logged
Blues Player Do Not Retire
They Just Drop !!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Keybard to fit a 114, anyone?
« Reply #18 on: September 25, 2018, 03:49:32 PM »

Thanks for the advice Johnnie, but it's like the Rolling Stones song.....all over now!
Being a dodgey old HGV and PSV mechanic, I had a right hand drill and drilled out the whole threaded bit, packed it with wood and ended up with a big nasty screw into that. I patched where the thumbstrap had been with some plywood and re-enforced it with another bit of ply, and it all seems to be holding together nicely. (Mind you, it wouldn't win any beauty contests!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal