Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Get rid of mildew smells?  (Read 9675 times)

0 Members and 1 Guest are viewing this topic.

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #20 on: March 08, 2015, 04:07:45 PM »

Thanks for the detailed description. sounds pretty straightforward...but just wondering about the gasket, might I not end up with a leakier accordion than I started with if I disrupt a union that has been seated together for a very long time? I don't really have a choice with the mildew box...but it could be a bad idea to just open boxes for reed pictures as I mentioned earlier...does that happen sometimes?
Logged
Selling as szmaine on US eBay!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Get rid of mildew smells?
« Reply #21 on: March 08, 2015, 04:22:54 PM »

It's glue on to one side so not likely to damage it, would be my guess.
But if you did it's probably easier to fix than the mildew ;)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Get rid of mildew smells?
« Reply #22 on: March 08, 2015, 05:22:54 PM »

Thanks for the detailed description. sounds pretty straightforward...but just wondering about the gasket, might I not end up with a leakier accordion than I started with if I disrupt a union that has been seated together for a very long time? I don't really have a choice with the mildew box...but it could be a bad idea to just open boxes for reed pictures as I mentioned earlier...does that happen sometimes?

Don't be afraid of the bellows gasket. If it is still functioning OK, then opening up the box a few times isn't going to cause much deterioration, if any.

On the other hand, if the bellows gasket is old and very compressed, it is probably not doing its job anyway and it would be much better to replace it. It is surprising how much improvement can be made to the response and air-tightness simply by replacing the bellows gasket, even if there seems to be no obvious air leakage.

Replacing the gasket is one of the easier jobs in melodeon maintenance. You need to pull off the old gasket and scrape off the remains of any glue (usually quite gungy) and replace it with the proper stuff obtainable from Charlie Marshall here:

http://www.cgmmusical.co.uk
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellows_Gasket.html

The new gasket material is self-adhesive. Just lay it on in position a bit at a time, pressing it gently into place and removing the backing paper bit by bit. Take care not to stretch the gasket whilst applying it - just nice and relaxed is fine. Ease it round the corners - it is very flexible. To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

 

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Get rid of mildew smells?
« Reply #23 on: March 08, 2015, 05:24:59 PM »

To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap at a shallow angle to make a diagonal but joint.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Get rid of mildew smells?
« Reply #24 on: March 08, 2015, 05:27:41 PM »

Good Idea Lester!!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #25 on: March 08, 2015, 05:48:03 PM »

To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap at a shallow angle to make a diagonal but joint.

Makes sense, know that trick in wallpapering. (:)
Logged
Selling as szmaine on US eBay!

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #26 on: March 08, 2015, 05:49:54 PM »

Thanks for the detailed description. sounds pretty straightforward...but just wondering about the gasket, might I not end up with a leakier accordion than I started with if I disrupt a union that has been seated together for a very long time? I don't really have a choice with the mildew box...but it could be a bad idea to just open boxes for reed pictures as I mentioned earlier...does that happen sometimes?

Don't be afraid of the bellows gasket. If it is still functioning OK, then opening up the box a few times isn't going to cause much deterioration, if any.

On the other hand, if the bellows gasket is old and very compressed, it is probably not doing its job anyway and it would be much better to replace it. It is surprising how much improvement can be made to the response and air-tightness simply by replacing the bellows gasket, even if there seems to be no obvious air leakage.

Replacing the gasket is one of the easier jobs in melodeon maintenance. You need to pull off the old gasket and scrape off the remains of any glue (usually quite gungy) and replace it with the proper stuff obtainable from Charlie Marshall here:

http://www.cgmmusical.co.uk
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellows_Gasket.html

The new gasket material is self-adhesive. Just lay it on in position a bit at a time, pressing it gently into place and removing the backing paper bit by bit. Take care not to stretch the gasket whilst applying it - just nice and relaxed is fine. Ease it round the corners - it is very flexible. To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

You are a great describer! Something that sounds easy enough to try if one gets in a pickle...I probably have some here...somewhere. TY
Logged
Selling as szmaine on US eBay!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Get rid of mildew smells?
« Reply #27 on: March 08, 2015, 05:53:49 PM »

You are a great describer!
Thank you Suzanne.  :|bl

... at a shallow angle to make a diagonal butt joint.

Yes - I do this too. I should have mentioned it in my description, sorry....
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Get rid of mildew smells?
« Reply #28 on: March 09, 2015, 07:01:05 AM »

All the above of is right of course. BUT. It's worth mentioning that new gasket material will be thicker than the original because it's not yet been compressed. You may have to push the end plates quite hard to get the pins to slide in easily.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: Get rid of mildew smells?
« Reply #29 on: June 17, 2015, 12:52:16 PM »

Some good old 'hooker' $2 perfume from WoolWorth would do the trick me thinks.. ;-)
Logged
Every Day Is A Great Day
Some Are Better Than Others
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal