Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Enlargening air button hole on Hohner Corso  (Read 1100 times)

0 Members and 1 Guest are viewing this topic.

Marta M

  • Member
  • *
  • Offline Offline
  • Posts: 6
Enlargening air button hole on Hohner Corso
« on: March 22, 2014, 11:09:11 AM »

Last November I bought a Hohner Corso, with which I am very pleased. I had it have a general fettling-up with new valve felts and waxing, of course tuning and even a new Italian-made bellows. I have played it a lot since then, but still I notice that although the bellows are quite worked-in, whenever I want to quickly open the bellows in short spaces in-between very fast-going music, I have to pull relatively hard. I suspect the air-button hole is too small, and in fact it seemed to me so when I opened the bass side and had a look at it.

Apart from this melodeon, I have an old Hohner, a Hohner Morgane and an Excelsior Bilbo. On this last, I had the air hole considerably enlargened and am very happy with it, although at first I had to get used to it (kind of the buttons seemed to lose sound; it is a small melodeon of compact built).

I would be grateful if other players of Hoher Corsos could tell me if they have had the button air hole made larger. I remember especially a post of George Garside of Jan. 14, 2012, in which he said: "I like 'instant bellows collapse' to enable a return to tight bellows immediately following a long series of pulls". George, since I know you have a Corso, have you had the air hole made larger? Have others? What was your experience? What makes me hesitate is the fact that this melodeon has been built for so may years, and if the air hole was thought to be too small, surely the people at Hohner's would then have decided to make it bigger in the first place?

I would greatly appreciate any comments on this. Thank you very much.     
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Enlargening air button hole on Hohner Corso
« Reply #1 on: March 22, 2014, 02:05:16 PM »

Marta,

If the air hole is too small for you, then you are correct.  Everything in life is a compromise and the design of the air button on melodeons maybe doubly so - each style of playing makes different demands on the instrument and styles change over the years.  PAs, CBAs and the Club models always seem to have a more than adequate air hole - probably because of the style of playing they were originally envisaged to be used for and there is never too much flow of air, so you can't fit too big a valve.

I'm not familiar with the Corso, but most larger Hohners have plenty of room to enlarge the hole and fit a bigger valve.  Another way to improve the situation would be to fit a second air hole at the opposite end of the instrument and link it to the original, so doubling the effective size of the air hole.  I'm sure any of the repairers whose details are listed on this site would be happy to sort it out for you, although it isn't a job beyond the capabilities of a good DIY person.

Rob.
Logged

Marta M

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: Enlargening air button hole on Hohner Corso
« Reply #2 on: March 24, 2014, 08:21:56 AM »

Rob,

thank you very much for your friendly and helpful reply. You are probably right, I hadn't thought of different players being more confortable with different air hole sizes, somehow I thought that it simply depended on the melodeon model and was more or less the same for everybody. I'll speak with my local repairer, where I usually take my melodeons for regular tuning (and who already adapted my Bilbo's air hole). Thanks again and best wishes from Madrid! 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal