Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Strap brackets again....  (Read 1310 times)

0 Members and 1 Guest are viewing this topic.

Guy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 776
  • Not quite enough melodeons....
    • Cats Claw
Strap brackets again....
« on: March 12, 2014, 12:21:45 PM »

I have a new (to me) celluloid-covered instrument; trouble is it came without any strap brackets. It’s very distinctive (those who study the Buy and Sell column may remember a certain multicoloured Baffetti), and I don’t want to damage its strange unnatural beauty.  I do need straps, and I’ve seen Steve’s very helpful step-by-step here http://forum.melodeon.net/index.php/topic,2045.msg20769.html#msg20769 , but just wondered before doing anything if there were any pitfalls in attaching brackets to celluloid?
Many thanks,
Guy
Logged
Guy, in South Wales

Cats Claw, http://www.cats-claw.co.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Strap brackets again....
« Reply #1 on: March 12, 2014, 12:39:52 PM »

.... but just wondered before doing anything if there were any pitfalls in attaching brackets to celluloid?
No particular precautions to take. The celluloid is just a thin surface layer, 1mm or less, and then you will be into wood. It might be worth taking the RH end away from the bellows just so you can measure the thickness of the wood which you will be screwing into and obtain suitable length screws accordingly. The screws need to be long enough to penetrate the full thickness of the wood but ideally no further. If you can just see the tiniest hint of the screw point penetrating through the wood, that's OK, but no more than that. 

Also if the wood is softish, try to use slightly larger diameter screws, as these will hold better in the softer wood. Hardwoods like walnut or cherry will allow a smaller diameter screw.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Guy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 776
  • Not quite enough melodeons....
    • Cats Claw
Re: Strap brackets again....
« Reply #2 on: March 12, 2014, 06:01:02 PM »

Thanks again Steve, that's absolutely brilliant.....exactly what I needed to know!

Cheers,
Guy
Logged
Guy, in South Wales

Cats Claw, http://www.cats-claw.co.uk

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Strap brackets again....
« Reply #3 on: March 14, 2014, 05:01:48 PM »

For what it's worth ignore the celluloid, I wouldn't think it was even 1 mil thick. I agree with Steve, but if the wood is thin or soft or crappy then nuts and bolts with washers is a permanent option.

While I'm here.:-
A newspaper headline concerning a mad serial rapist who attacked a laundry.
NUT SCREWS WASHERS AND BOLTS.
OK Theo, chuck me out .  >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal