Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning down brass reed tongues.  (Read 1358 times)

0 Members and 1 Guest are viewing this topic.

o_gaiteiro_do_chicago

  • Guest
Tuning down brass reed tongues.
« on: March 22, 2014, 06:21:30 PM »

I have done a bit of harmonium tuning but have been a bit stumped recently. A friend of mine wants me to take the drones and tune them all down a half step. They are somewhat long and soft tongues so I'm not wanting to file them to lower the pitch. I'm also a bit paranoid of using solder because of the heat and the fact brass heats up so quickly. I'm wondering if weighting the tongues with plumber's epoxy or some other hardening material would do the trick? Has anyone ever tried that?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning down brass reed tongues.
« Reply #1 on: March 22, 2014, 06:26:58 PM »

You are quite right not to file to lower the pitch.  I've not tried plumbers epoxy but you might need rather a large lump to get the pitch change you need because it is much less dense than solder or brass.  Other possible methods would be to use solder but apply a heat sink to the reed to stop the whole reed being heated, or use epoxy adhesive to attach a brass weight to the reed tip.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Tuning down brass reed tongues.
« Reply #2 on: March 22, 2014, 10:46:06 PM »

I've successfully used blobs of enamel paint  to lower reed pitch before, but I don't know if it will take them that far down
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Tuning down brass reed tongues.
« Reply #3 on: March 24, 2014, 09:47:08 PM »

Use electrical solder if you are worried about heat, about 335F instead of about 450F for plumbing solder.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal