Been wanting to give you this little tips for a while.

As an alternative to the PVA adhesives widely used on melodeons I thought I might give a tips about these two adhesives, which I think might be of great use for some melodeon repairers and makers:
Lascaux acrylic adhesive 498 HV
Lascaux acrylic adhesive 303 HV
The Lascaux 498 HV is perfect for adhering leather and felt to pallets, and bellows tape ...
When dried the 498 HV gets hard but are still elastic / flexible and it’s fairly easy to remove felt from the pallets without the use of solvent, but to remove the adhesive from the pallet you will need to use acetone.
To do my own empiric test of the mechanical properties of 498 HV, I’ve used it for adhering reed valves, (leather, and mylar valves), to both aluminum and zinc reed plates, and to my surprise these valves are still sticking with no failure yet, and it must have been 5 years ago I did this.
Short explanation of both 498 HV and 303 HV:
For work on a melodeon I think that the 498 HV would work best on its own. But the 498 HV and 303 HV are mixable. The 498 HV have a higher Tg (+13 Tg) than 303 HV (-31Tg), so 303 HV remains permanently tacky when dry, which means that it’s possible to change the properties of the adhesive when mixing 498 HV with 303 HV. When mixing with the 303 HV you can change the adhesive’s properties toward a more flexible and weaker bond, which you might find appropriate to test for somethings… But would recommend starting out testing the 498 HV.
Both adhesive s are water soluble before drying and when dried soluble in acetone.
I buy these Products directly from Lascaux or from Deffner & Johan in Germany. Unfortunately I do not know where to get these in the UK.
Edit: Some major spelling and understanding - there are probably more!