Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: bellows problem  (Read 2109 times)

0 Members and 1 Guest are viewing this topic.

geoffers

  • Member
  • *
  • Offline Offline
  • Posts: 19
bellows problem
« on: October 12, 2014, 07:10:38 AM »

Hi all, I have an old box I am working on, the final problem is the bellows, i have watched lester's youtube video which explains how to tape the outside edge, but is it possible to revamp the rest of the bellows  and inner corners or is it too much of a job. I have done the hold up to the light trick and have found the many holes.can you help.
. Thanks geoffers
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: bellows problem
« Reply #1 on: October 12, 2014, 09:24:24 PM »

Geoff, it's not difficult but bloody boring. I have a YouTube vid out there somewhere but I don't have the tech to give you a link. If it's a cheap box you might be able to stick little bits of craft paper inside to block up the holes. As I said it's not difficult, but you need to be dedicated.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

A.J. Walker

  • Good talker
  • **
  • Offline Offline
  • Posts: 58
Re: bellows problem
« Reply #2 on: October 12, 2014, 09:38:16 PM »

Here are a couple sites with repair tips that may be of help........

http://1accordion.net/bellows.htm

http://www.accordionrevival.com/ACCORDION_REPAIR1.php

I've seen videos of taping, but none for repairing/replacing the leather gussets at the corners.
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: bellows problem
« Reply #3 on: October 12, 2014, 10:48:39 PM »

I did my Erika with leather diamonds from Charlie Marshall stuck into the corners with bostik contact. I followed Nicks video on bellows making at the time (thanks nick! ) - I think he pushes it into the corners with a pair of scissors. If I were doing it again I'd pare the leather and make it thinner. But even with my general incompetence , and glue all over the place, it made a big difference to the way they hold air, and I'm glad someone talked me out of buying new bellows.
Steve
Just found a discussion on gussets http://forum.melodeon.net/index.php/topic,13409.msg165061.html#msg165061 and I reckon Nick's video must be linked in the chanson thread,http://forum.melodeon.net/index.php/topic,11312.msg158881.html#msg158881 but there's 27 pages of it (!) and I haven't found it yet.
« Last Edit: October 12, 2014, 10:51:48 PM by penn »
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: bellows problem
« Reply #4 on: October 12, 2014, 11:24:14 PM »

I had a go at the bellows of a cheap German concertina a while back.
When I fixed the large holes I found the medium sized holes, when I fixed the medium size holes I found the small holes, when I started fixing the small holes the cardboard started to disintegrate due to the increased pressure.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

iaenmor

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: bellows problem
« Reply #5 on: October 13, 2014, 05:27:12 AM »

I believe this is the video Nick is referring to.  https://www.youtube.com/watch?v=5N1YfUGBJ-o
Logged

geoffers

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: bellows problem
« Reply #6 on: October 13, 2014, 05:49:43 AM »

Thanks folks, again you have come up trumps, watched the youtube video, explains what I need to do, will report on results when I get the glue off my fingers!
   geoffers
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: bellows problem
« Reply #7 on: October 13, 2014, 07:09:57 AM »

So THATs where my bones that I lost at Whitby went !  ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: bellows problem
« Reply #8 on: October 13, 2014, 07:19:47 AM »

 8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

geoffers

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: bellows problem
« Reply #9 on: October 17, 2014, 06:22:24 AM »

Well the job done, quite a fiddle as you say nick, when I first bought it ;D it was sounding like a wheasy old nag, now with a rewax, revalve and a good bit of puff she's singing like a lark, the box didn't cost much so worth an attempt, I need to see a fettler now to tune it up, as long as he dose'nt look too closely at the workmanship!!
. Geoff
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: bellows problem
« Reply #10 on: October 17, 2014, 07:18:37 AM »

Excellent Geoff.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: bellows problem
« Reply #11 on: October 19, 2014, 05:54:46 PM »

For little pinholes caused by bugs I have had great success cutting little 4mm dots from some thin skived leather and gluing them in place with a little dot of white glue. Keep the glue layer thin to maintain flexibility.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal