Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning tools  (Read 1472 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Tuning tools
« on: October 30, 2014, 07:07:06 PM »

Does anyone out there use a hook or reed puller, when accessing the lower reed in a plate?
I've got lots of old reeds to practice on, and I've made a hook from brass, but I either haven't got the tool right or the technique.
Could someone post a picture of their hook(s) please? I've based mine on the one in the Thierry Benetoux book, but I'm not sure if I have enough of an angle on the end of the tool, which also has a little step in the end of it, whereas the ones shown in this video look more hook shaped http://m.youtube.com/watch?v=rdap-lYsKbw

So far all I've managed to do is bend the end of a reed tongue, when trying to get it to pop up with my hook. Definitely a technique to learn on old busted up reeds, and certainly not for the faint hearted!!

Thanks

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning tools
« Reply #1 on: October 30, 2014, 07:13:20 PM »

Not reed hooking because, like you I found it difficult, but reed lifting using the German method

https://www.youtube.com/watch?v=EmIrJdQNvHI

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Tuning tools
« Reply #2 on: October 30, 2014, 09:33:19 PM »

Hi Lester, thanks for that. I might stick to the wire lifter..

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning tools
« Reply #3 on: October 31, 2014, 07:30:24 AM »

Wire hook lifter needs to be made of something stiffer than brass wire - usually piano wire.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal