Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dave's Corona II and Corso  (Read 2264 times)

0 Members and 1 Guest are viewing this topic.

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Dave's Corona II and Corso
« on: April 23, 2015, 09:40:36 PM »

So these are the two accordions I want to bring back to life. Both played wonderfully when I bought them in the late '80s. Both were used accordions when I bought them so I don't know how old they are. If I had to guess I would think 60s or 70s vintages but that is a wild guess.

Can I just order a complete set of valves and wax/tools for them all at once from CGM? What info do I need to give them? I have looked at their rewaxing tutorials and some of the other things on youtube. I will study more but I would like to order what I need soon so I have it when I am ready in a couple weeks.

Thanks again for your patience.
Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Dave's Corona II and Corso
« Reply #1 on: April 23, 2015, 09:43:32 PM »

And here are the closeups on the bass side labels.
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Dave's Corona II and Corso
« Reply #2 on: April 24, 2015, 09:00:42 AM »

You will find valves and more or less anything you need on Charlie's site. Beware of the video though; having a pan of reed wax and an open flame is definitely not recommended, and certainly not for a beginner - if it ignites, it's rather like a chip pan fire. Use a safer method please... here's Lester's for example:

https://www.youtube.com/watch?v=dUaHU1vY8f0

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: Dave's Corona II and Corso
« Reply #3 on: April 24, 2015, 09:36:42 AM »

or.....you could order new reed blocks from Hohner-c shop and save your time  8)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dave's Corona II and Corso
« Reply #4 on: April 24, 2015, 09:50:27 AM »

or.....you could order new reed blocks from Hohner-c shop and save your time  8)

Except that, for D/G Erica blocks certainly, they are long term out of stock for 15 weeks  :o

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Dave's Corona II and Corso
« Reply #5 on: April 24, 2015, 12:36:49 PM »

Okay. Thanks Clive, Lester, and invadem. I am actually quite handy with tools and would prefer to learn this and do it rather than buy new reed blocks. I really like the sound of the reeds that are currently in these boxes. The boxes just wheeze and pass air too much to make playing easy anymore. I assume (Probably a bad thing to do.) that if they are rewaxed and the valves are replaced that will take care of most of the issues. These have never been attic queens. I played them until they got tired and then I bought new ones. Thanks again, Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Dave's Corona II and Corso
« Reply #6 on: April 24, 2015, 12:44:13 PM »

The tuning will be probably be good enough if they haven't been put in an attic and rusted; waxing/revalving is a good first step, and you can retune any reeds that are obviously out later. But if you're losing significant amounts of air, you've may have another physical air leak somewhere, bellows gasket rotted, hole in bellows, pallet not fitting flush properly, etc.

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Dave's Corona II and Corso
« Reply #7 on: April 24, 2015, 01:04:54 PM »

That's good info, Clive. I planned to begin with new valves and rewaxing. Then go from there until they are done. There is only one reed that is out of tune on the three-row. All others are fine. Both boxes are playable. They just don't play as well as they once did or should. Thanks again. I guess the next step is to send an email to CGM and ask what I need to get started.
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dave's Corona II and Corso
« Reply #8 on: April 24, 2015, 01:10:18 PM »

Replacing valves can make a big difference, but only if the ones that are there are defective.   Have a look at the valves.  Are any missing, are any not lying flat?  Is the wax hard and brittle and scratching it produces a white powdery mark?  If the answer to all questions is "no" then there is no advantage to be had by new valves and wax.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Dave's Corona II and Corso
« Reply #9 on: April 24, 2015, 09:50:45 PM »

That is very helpful, Theo. I will run that check before ordering anything. I have whittled the repair pile down to only one violin in my shop and should have it out the door by the end of the week. Then I will begin on accordions. I am starting to get excited. It will be nice to play them again. I also had a friend call last night. He found a 2 1/2 row flat box in his mother's attic and he is giving it to me. It will probably require far more work but will be a neat little project. Thanks again for the tip. I will take a look at the valves and wax as a first step. Cheers, Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Dave's Corona II and Corso
« Reply #10 on: April 25, 2015, 01:13:57 AM »

I wish I could whittle my repair work down to only one violin. I am deluged with broken melodeons.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Dave's Corona II and Corso
« Reply #11 on: April 27, 2015, 05:18:36 PM »

It sounds like your instrument might use the plastic valves, these can be reused if they are not creased or damaged.
 I would try the soldering iron with the blade and wax rolled into sticks, this is way less intimidating than the pot method for beginners ,and works well for spot repair as you don't have to have a pot ready all the time.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Dave's Corona II and Corso
« Reply #12 on: April 28, 2015, 02:10:13 PM »

Thank you, Kimric. I think that the soldering iron will work fine for the three row. The little two row appears to need more work (Valves) so I may end up using both methods. I have taken a peek inside both boxes now. I have been reading the various plastic v. leather valve debates here for info.

Thanks again to everyone. You all have been very helpful.

Cheers,
Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal