Hi Theo,
thank you for the instant reply! Yes, I believe the instrument has the original valves all over, and I'm aware of the fact that I might be ending up replacing them alltogether.
However, the overall pitch is not so bad, and only few valves are making noise, mainly with the pull reeds sounding. If this indicates a problem inside the reed chambers, unlucky me; but if it could be just the other way round, I would start with working on some easily accessable valves (since it's highly unlikely that there would be enough spare time for doing the big job in its entirety in the nearer future I'm afraid).
I guess that's what I will do anyway: start with working on the baddest valves, inside or outside... I would nevertheless appreciate opponions where that might be.
Best wishes - Wolf