Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Tuning Table Construction  (Read 7373 times)

0 Members and 1 Guest are viewing this topic.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning Table Construction
« Reply #20 on: July 31, 2015, 02:46:49 PM »

Senhor Uga-buga: Rudimentary or not rudimentary, your approach is as unprofessional as can be. If you want to learn by making horrible mistakes, that's ok with me. But in this forum there are actually quite a few skilled tuners, all happy to share their knowledge with unexperienced people like yourself, so you might be well advised to listen to what they have to say rather than laugh uncontrollably.
« Last Edit: July 31, 2015, 06:05:22 PM by diatonix »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tuning Table Construction
« Reply #21 on: July 31, 2015, 04:49:52 PM »

Now adding: as to a reed scratcher, there seem to be different, well, cultures of tuning in a melodeon/accordion and a concertina world. I reckon it would never be recommended to scratch a concertina reed. OTOH, they're all so easily accessible...
Don't be put off by the term 'reed scratcher' thinking that it implies a crude tool or technique. That's not the case. It's actually quite okay to flatten a reed by scratching the belly of the reed. What you are doing (or should be aiming for) is to create a groove or a series of grooves in a controlled and careful manner. Think of it as very localised filing which removes steel in the axial area of the reed tongue, not near the edges. By maintaining the edges of the reed tongue intact, I believe it is less likely to cause stress failure in the reed, compared with filing all the way across the width of the reed tongue.

I do agree with you about concertina reeds though. They tend to be stiffer and have a different geometry. I would never scratch a concertina reed. If I need to flatten one (not something I do very often, I have to admit), I will use a very fine file tool made by gluing a strip of 400-grade carborundum paper to a semi-circular piece of wood dowelling, as recommended by Dave Elliott in his concertina repair manual, and I go very, very carefully! Real concertina reeds are precious!

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

brazilian.BOX

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 416
  • youtube search: 8 baixos
Re: Tuning Table Construction
« Reply #22 on: August 02, 2015, 07:55:10 PM »

this forum there are actually quite a few skilled tuners, all happy to share their knowledge with unexperienced people like yourself, so you might be well advised to listen to what they have to say

Yeah, and I feel privileged for have such company close to me. That's ok. But everyone has the right to give a 1st step towards a new skill in the way that they want, or in the way that they CAN.

Do I intend to have a professional table tuning ahead in a future? For sure, yes.
But, as I don't have the complete equipment, and all the money to start it, and all the time to dedicate on it right now, so, I believe I can also do any "rudimentary" attempts.

So, that was the sense of the example I gave. And talking clearly about... would be an introduction, would be an attempt, would be amateur and non-professional obviously. Just a very 1st contact with a interest that I have for the FUTURE.  ;)

It will be MY very 1st step towards tuning works, and I made the choice at this sense, and this way that will be FOR ME. I was never suggesting you made the same. I was just presenting a video and pointing exactly how rudimentary it was, and it IS.

I was never suggesting that rudimentary device, as a good way to do tuning or a professional way to do accordion tuning. Never. My words at the posts are very clear at this sense.

« Last Edit: August 02, 2015, 07:57:59 PM by brazilian.BOX »
Logged
The Brazilian chromatic tuning: www.youtube.com/watch?v=HwLF1tH3q5Y

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning Table Construction
« Reply #23 on: August 02, 2015, 09:32:08 PM »

I have an old pre-WW2 tuning table. I only use it when raw-tuning new pristine reeds that go into my own boxes. The fine-tuning is always done on my very simple tuning bellows or even the instrument itself. I very rarely use my table for other purposes, except maybe in cases where I have to deal with reeds affected by corrosion and therefore horribly out of tune. But most tuning work, even after re-valving/waxing, is done on the tuning bellows, with the reed blocks in situ. I'm currently making a video clip (with the help of my daughters) which will show the process and which I hope will be of better use than a lot of words.
« Last Edit: August 02, 2015, 10:59:25 PM by diatonix »
Logged

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: Tuning Table Construction
« Reply #24 on: August 02, 2015, 10:24:54 PM »

BB: Maybe you could just promise not to use a Dremel with your apparatus however that me be then...  8)

Diatonix: will be much appreciated!
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

brazilian.BOX

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 416
  • youtube search: 8 baixos
Re: Tuning Table Construction
« Reply #25 on: August 03, 2015, 12:29:40 AM »

BB: Maybe you could just promise not to use a Dremel with your apparatus however that me be then...  8)

OK, I won't!  :D ;)
Logged
The Brazilian chromatic tuning: www.youtube.com/watch?v=HwLF1tH3q5Y

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: Tuning Table Construction
« Reply #26 on: August 03, 2015, 12:35:52 AM »

BB: Maybe you could just promise not to use a Dremel with your apparatus however that me be then...  8)

OK, I won't!  :D ;)

Very good!  :|glug
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal