Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Anyone know what make this box is?  (Read 2437 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Anyone know what make this box is?
« on: October 19, 2015, 10:07:54 AM »

Hi

I have just restored this box but I don't really know what make it is. Can anyone suggest an age and maker?
The veneer and banding is marvellous (and how weird the banding is the same as I have on my Pariselle box).
It is in CF and has a gleichton C/C button and a club bass layout. I had to replace all the bass buttons which were all smashed up and put in a new air button, which had gone awol. The reeds are all screwed into place and have a little oval cutout in one end to accommodate the screw. The low bass reeds are *huge*, I mean they are *big*, hence the wonderful honking sound.
https://youtu.be/PtwScEBI71U

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Anyone know what make this box is?
« Reply #1 on: October 19, 2015, 11:21:41 AM »

It'd be typical of what many German makers would have made and described as an "Italian model" in the 1920's, but those buttons and the bellows make me think of Hohner as a possibility, or maybe their Trossingen rivals Koch.

Are there clues as to what kind of wind key it once had, and what are the reeds like?

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Anyone know what make this box is?
« Reply #2 on: October 19, 2015, 11:54:41 AM »

Looks like you've done a lovely job there Rog.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Anyone know what make this box is?
« Reply #3 on: October 19, 2015, 12:15:42 PM »

It'd be typical of what many German makers would have made and described as an "Italian model" in the 1920's, but those buttons and the bellows make me think of Hohner as a possibility, or maybe their Trossingen rivals Koch.

Are there clues as to what kind of wind key it once had, and what are the reeds like?

Here is an album of pics so you can see the reeds. Also the bass end. It's all made of timber and wire! I had fun getting the old buttons off - the screws just shattered - and had to make new pistons.
https://goo.gl/photos/1PB8GEzRTJN3mHKNA

Thanks Nick. The hardest part was sorting out an air leak, which turned out to be through the treble fondo - some glue sorted that out once I worked out where the flippin air was going... (:)

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Anyone know what make this box is?
« Reply #4 on: October 19, 2015, 01:08:31 PM »

Very nice job. Where do you get the leather discs that are holding the rods on to the pads/pallets?

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Anyone know what make this box is?
« Reply #5 on: October 19, 2015, 01:29:16 PM »

Lovely job Roger, made my fingers itch to be doing something similar. If my German son in law manages to unearth a beaten up one row in Bb for me I'll be picking your brains for sure...
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Anyone know what make this box is?
« Reply #6 on: October 19, 2015, 02:17:17 PM »

Very nice job. Where do you get the leather discs that are holding the rods on to the pads/pallets?

John

Ah.. these are the original ones. i didn't have to do anything to the bass pallets.
« Last Edit: October 19, 2015, 02:21:19 PM by RogerThomas »
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Anyone know what make this box is?
« Reply #7 on: October 19, 2015, 05:36:09 PM »

Here is an album of pics so you can see the reeds.

Dix reeds on seperate plates, it could well be a Hohner 374 "Stradella Model" from the '20s then, though in the catalogue they have a lyre design in the middle of the grille...

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Anyone know what make this box is?
« Reply #8 on: October 19, 2015, 09:16:24 PM »

Yes,, I like to think it's an early Hohner, or at least maybe the reeds are Hohner.  But wouldn't there be some identifying lettering somewhere...

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Anyone know what make this box is?
« Reply #9 on: October 20, 2015, 12:10:15 AM »

No, the reeds are stamped with a circle, so they're made by Gebrüder Dix in Gera.

Hohner used them before they made their own steel reeds, though plenty more makers did too.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Anyone know what make this box is?
« Reply #10 on: October 20, 2015, 09:08:25 AM »

Hi Triskel,

thanks for that. Yes indeed they are stamped with a circle. And you said Dix reeds in a previous post.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal