Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Re- waxing with or without pins.  (Read 5427 times)

0 Members and 1 Guest are viewing this topic.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Re- waxing with or without pins.
« Reply #20 on: January 16, 2016, 02:23:38 AM »

But it sounds as though you are talking about putting the pins back AND waxing them. I'm just wondering about pins NO wax.   :-\
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Re- waxing with or without pins.
« Reply #21 on: January 16, 2016, 02:48:15 AM »

I doubt that you would get anything like a good enough air seal without either wax or a soft leather gasket for the reed plates to sit on, even if the wood of which the block was made was incredibly finely machined.

Logged
Tuner/repairer, now retired.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Re- waxing with or without pins.
« Reply #22 on: January 16, 2016, 04:04:25 AM »

Malcolm - the original leather gaskets are there.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Re- waxing with or without pins.
« Reply #23 on: January 16, 2016, 05:17:05 AM »

Malcolm - the original leather gaskets are there.

Sorry, might have misunderstood your meaning.

As Lester said earlier, if the gaskets are good, pins *might* work, but your own suggestion of fine screws would likely give a better seal and less movement. If there is any doubt about the condition of the gasket leather, either replace it, or remove it and go with wax. Pins optional, but if the reed plates are flat mounted as in a Hohner 1140, I personally would recommend them. Others may differ....   8)

As for a tonal change, almost certainly, but whether it might be for better or worse, or whether it is discernible when playing, hard to say. I would suggest that perhaps leather gaskets would result in a more mellow tone; wax might make the reeds sound a little brighter.

Good luck with whichever method you use.
Logged
Tuner/repairer, now retired.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Re- waxing with or without pins.
« Reply #24 on: January 17, 2016, 04:19:31 PM »

My thinking is thinking that the pins were from an era before air conditioning was widespread.
 I get my tex-mex customers blowing a reed right off the block (not very common but it has happened once or twice) during the summer when they are playing outdoors.
 It can get over 100F during the summer if you go inland around here.

 I put the pins (if the instrument had them) jut barely in the holes and then do the waxing, then push them in when I am done.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Re- waxing with or without pins.
« Reply #25 on: January 17, 2016, 05:22:58 PM »

My thinking is thinking that the pins were from an era before air conditioning was widespread.
 I get my tex-mex customers blowing a reed right off the block (not very common but it has happened once or twice) during the summer when they are playing outdoors.
 It can get over 100F during the summer if you go inland around here.

 I put the pins (if the instrument had them) jut barely in the holes and then do the waxing, then push them in when I am done.

I also agree on this theory, Kimric. The pins were a stopgap in the event of full or partial *meltage*. Perhaps the wax forumlae of those times also had a lower melting point  ???
Logged

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Re- waxing with or without pins.
« Reply #26 on: January 17, 2016, 06:51:01 PM »

So, are you saying that there was a period when both pins AND wax were used in combination?
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Re- waxing with or without pins.
« Reply #27 on: January 17, 2016, 07:43:44 PM »

So, are you saying that there was a period when both pins AND wax were used in combination?

Absolutely so; all the Hohner boxes I've removed pins from have had wax as well.  Seems to have been the standard MO for quite a time.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Re- waxing with or without pins.
« Reply #28 on: January 17, 2016, 08:43:01 PM »

Itr`d be interesting to know when they stopped doing it , the 80s Swiss Erica I had didn`t have any , nor the 80s Concerto-III PA , obviously my 90s German Corona-III hasn`t either .. the flush grille boxes I`ve had (Trichord-II and III / Corso / Ericas) have had which takes the practice into the 50s at least in the mainstream and the early 70s Club Morino had small reed-nails dotted around where they could be fitted which was limited as most of the reeds were almost touching (it had none of the big pins, even on the bass reeds)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Re- waxing with or without pins.
« Reply #29 on: January 18, 2016, 05:49:37 AM »

Weltmeister started using pins again on the Tex-Mex boxes when we had people blowing reeds out of the warm wax on really hot days, but then again those folks play so hard the snap reeds off on a regular basis.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Re- waxing with or without pins.
« Reply #30 on: January 18, 2016, 06:46:43 AM »

So, are you saying that there was a period when both pins AND wax were used in combination?

Absolutely so; all the Hohner boxes I've removed pins from have had wax as well.  Seems to have been the standard MO for quite a time.

Graham

  As a clarification in this thread, do "pins" signify the mushroom head tacks or the small right-angle "L" shaped tacks, as opposed to actual threaded screws and washers that were used to fasten reed plates on to leather faced gaskets???
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re- waxing with or without pins.
« Reply #31 on: January 18, 2016, 07:59:34 AM »

As a clarification in this thread, do "pins" signify the mushroom head tacks or the small right-angle "L" shaped tacks, as opposed to actual threaded screws and washers that were used to fasten reed plates on to leather faced gaskets???
I think both sorts could be described as 'pins' although I suspect the 'L' shaped tacks might be better termed 'reed (plate) nails'. I've only ever seen the dome-head pins used with wax. The L-shaped nails I've only seen fixing the reed plates directly on to leather gaskets and never in combination with wax. But others with more experience of old Hohners may know differently.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Re- waxing with or without pins.
« Reply #32 on: January 18, 2016, 12:23:55 PM »


... the 'L' shaped tacks might be better termed 'reed (plate) nails'.


H-O model railway spikes, available from all good model shops....    8)

Can't ever recall seeing these on Hohners with waxed-in reedplates.

(Off topic, but I find these very useful for a particular anglo concertina modification, but won't go into detail here unless any one really wants to know....)
Logged
Tuner/repairer, now retired.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Re- waxing with or without pins.
« Reply #33 on: January 18, 2016, 04:21:27 PM »

Ok ... now I'm understanding (I think) the sequence of events: leather gaskets with pins (& L-shaped tacks), which is what I have on my 1920's (I think) Hohner; then Hohner eliminated the gaskets & tacks & used wax but kept the pins, then eliminated the pins altogether. Looking at photos of 2 Pokerworks I owned, I see now that the older one (1950's, I think) had pins as well as wax, while the more recent one (1980's, I think) didn't.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Re- waxing with or without pins.
« Reply #34 on: January 18, 2016, 08:57:06 PM »

[
(Off topic, but I find these very useful for a particular anglo concertina modification, but won't go into detail here unless any one really wants to know....)
Hmm -  I can only think of repairs to riveted actions.  >:E
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Re- waxing with or without pins.
« Reply #35 on: January 18, 2016, 09:18:12 PM »

I've seen a vid somewhere where small tacks are knocked into the reed block, the tops nipped off with wire cutters and then tapped over/bent with a smaller hammer  to hold the reed plate in place... Resulting in  'L'  shaped tacks.
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal