Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Noisy valves on new reeds  (Read 3159 times)

0 Members and 1 Guest are viewing this topic.

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Noisy valves on new reeds
« Reply #20 on: March 08, 2016, 08:34:37 PM »

Bingo, that was it. I didn't realise it could deform the plates to that degree; I knew that overtightening them could do something funky but I didn't realise the tongue would actually start hitting it. I had tried various tightnesses on that removed screw, but I hadn't tried adjusting the one on the other side; I slackened that off slightly and tightened the one I'd removed, and it seems to be rattle free now. Thanks for helping me troubleshoot it Theo (:)

Tempted to replace the screws with wax at some point. Would that mellow the sound of the box slightly?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Noisy valves on new reeds
« Reply #21 on: March 08, 2016, 08:51:38 PM »

What! Definitely a downgrade.
Think how much harder and more messy the valve job would have been. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Noisy valves on new reeds
« Reply #22 on: March 08, 2016, 09:02:27 PM »

Hehe, good point! Luckily the revalving of the other box I did recently went much smoother, or I would have been very bored of waxing by now.
I'm curious as to what difference screwing the reeds to the frame makes in terms of sound, but I guess I can make up a test reedblock at some point and try both methods out with the same reeds to see what happens (vaguely recall a thread about that sometime ago).
Logged

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Noisy valves on new reeds
« Reply #23 on: March 09, 2016, 12:08:19 PM »

Done some more tweaking today to fix the last of the raspy sounds I could hear. I'm not sure if it's recommended or not, but by bending the metal springs very slightly so they arc downwards towards the tip, it stops them from slapping on the valve and seems to solve the problem. Think I'm finally done with the valve swap on the treble side now, unless any new issues crop up. Gonna leave the bass end for now to see what it's like once they settle down :Ph
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal