Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reeds valves  (Read 2436 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
reeds valves
« on: March 12, 2016, 05:41:39 PM »

I have a new Cagnoni reeds. been 20 years package,,, I thought to put them on a new project,  but, but.... Valves come off as a  :-\
Maybe a bad glue,, Can I glue valves the Bison kit contact adhesive glue ? or maybe a Titebond wood glue ? or what is good

Thanks... (:)
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: reeds valves
« Reply #1 on: March 12, 2016, 06:02:11 PM »

I have a new Cagnoni reeds. been 20 years package,,, I thought to put them on a new project,  but, but.... Valves come off as a  :-\
Maybe a bad glue,, Can I glue valves the Bison kit contact adhesive glue ? or maybe a Titebond wood glue ? or what is good

Thanks... (:)

Don't use wood glue.

Clear contact adhesive is good. Just a light coating on the end of the valve (5 mm to 10 mm depending on the valve size) and press gently into place on the reed plate. No need to put any glue on the reed plate, just the end of the valve. It works fine.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: reeds valves
« Reply #2 on: March 12, 2016, 06:31:34 PM »

OK.. (:) Thank. You  :|||:
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: reeds valves
« Reply #3 on: March 12, 2016, 06:33:24 PM »

I use Bison contact adhesive in exactly the way Steve describes; works really well.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: reeds valves
« Reply #4 on: March 12, 2016, 06:40:35 PM »

very good ... thanks,
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: reeds valves
« Reply #5 on: March 12, 2016, 11:24:23 PM »

I use gasket shellac.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: reeds valves
« Reply #6 on: March 13, 2016, 12:16:52 AM »

I use gasket shellac.

Never heard of anyone using that before. It seems a bit like overkill to me. Does it come off cleanly and easily when you want it to?
Also, the product information indicates a 24-hour curing time which is far too long to be practical when you are replacing valves and tuning as consecutive work.

Valves attached with contact adhesive as described earlier are ready to be used within a few minutes.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: reeds valves
« Reply #7 on: March 13, 2016, 04:01:49 AM »

Shellac seems to be favoured by concertina repairers who are gluing leather valves to wood. I've not previously heard of any one using shellac on accordion or melodeon valves either.

I have, for many years, used contact as described above, applying to one surface only. However, in Oz, they have recently legislated the removal of certain chemicals from this type of product in an attempt to reduce "improper use" (i.e. glue sniffing). The resulting compound is now virtually useless as anything other than a contact adhesive as it skins in milliseconds, virtually as soon as it leaves the tube.

I am yet to find a suitable alternative produced, locally or legally imported. I might just have to try shellac myself....
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reeds valves
« Reply #8 on: March 13, 2016, 08:49:06 AM »

I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: reeds valves
« Reply #9 on: March 13, 2016, 09:03:27 AM »

I think that the animal glue was used before in Finland, (bone glue) reeds valves
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: reeds valves
« Reply #10 on: March 13, 2016, 09:09:52 AM »

I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.

That sounds pretty much like Bison  - much cheaper and easier to find in the shops than Bostik over here.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: reeds valves
« Reply #11 on: March 13, 2016, 07:33:07 PM »

I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.

That sounds pretty much like Bison  - much cheaper and easier to find in the shops than Bostik over here.

Graham

GPS, which Bison glue do you use?  Doing a search, I see Bison Tix, and Bison Kit.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: reeds valves
« Reply #12 on: March 13, 2016, 08:22:15 PM »

I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.

That sounds pretty much like Bison  - much cheaper and easier to find in the shops than Bostik over here.

Graham

GPS, which Bison glue do you use?  Doing a search, I see Bison Tix, and Bison Kit.

Bison Kit. It's what's available here, and it works well.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal