Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Sourcing a bass reed for an old 1-row  (Read 3292 times)

0 Members and 1 Guest are viewing this topic.

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Sourcing a bass reed for an old 1-row
« on: July 25, 2016, 02:15:42 PM »

I've been given an old Saxony 1-row dating from about 1901 which I fancy restoring to some sort of playability. It's approximately in the key of D and is missing the bass fundamental D/A reed. This is 80x30mm and seems to be much larger than anything Hohner can offer. Does anybody have an idea where I might source one?
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sourcing a bass reed for an old 1-row
« Reply #1 on: July 25, 2016, 02:28:58 PM »

It's not a bass reed that is missing it is a set of chords with three pairs of reeds on one plate.  The only place you will get one is from another old saxony box.  I might have something suitable.
« Last Edit: July 25, 2016, 02:30:34 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Sourcing a bass reed for an old 1-row
« Reply #2 on: July 25, 2016, 02:33:06 PM »

Isn't that the single plate chord reeds that's missing? 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sourcing a bass reed for an old 1-row
« Reply #3 on: July 25, 2016, 02:44:10 PM »

Isn't that the single plate chord reeds that's missing?

Yes that is what I was trying to say!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Sourcing a bass reed for an old 1-row
« Reply #4 on: July 25, 2016, 04:27:26 PM »

Yes that is what I was trying to say!
[/quote]

Ah, yes, sorry. Didn't see your reply.  Those single plate chord setups are my favorite part of those old boxes.  Love the sound.

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Re: Sourcing a bass reed for an old 1-row
« Reply #5 on: July 26, 2016, 01:31:58 PM »

Ah yes, thanks for putting me right chaps. Theo, I'll email you, so if you do find one, I am interested!
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: Sourcing a bass reed for an old 1-row
« Reply #6 on: July 27, 2016, 11:28:58 AM »

I have 2 sets in C,if you can't find anything better PM me  (:)  treble side has gone to Australia so you can have the cord reed plate.cheers 
Logged

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Re: Sourcing a bass reed for an old 1-row
« Reply #7 on: July 27, 2016, 07:00:07 PM »

Thanks for your offer invadm but Theo has found a plate in D/A.
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Re: Sourcing a bass reed for an old 1-row
« Reply #8 on: August 07, 2016, 01:48:22 PM »

The reeds and plates are remarkably rust-free (thanks again Theo for finding the chord plate), so now to the part I thought would be tricky, the double-acting treble mechanism. The spring action for the two pallet pairs at either end is fine, but all the others in the middle are way too stiff. The two axles are 1) made from very thin wire and 2) seem to be a very tight push fit into thin slots. There's nothing protruding at the ends on to which pliers might be applied to extract endways, so can anyone suggest a method to remove the axles without wrecking the mechanism so that the springs can be assessed an hopefully equalised?
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Sourcing a bass reed for an old 1-row
« Reply #9 on: August 07, 2016, 03:40:22 PM »

Is the slot the same size as the axle, or is it narrower? One of mine had the slot the same size, which allowed the whole mechanism to be riven out as one piece. Mind you, it knacked the axle, but that was relatively easy to replace.

On another one which I'm clarting on with, the slot is definitely narrower than the diameter of the axle, which is stuck fast! I've snapped the end off the axle twice, so far, and now it's flush with the woodwork. I'm reticent about cutting into the wood to get more purchase, but I don't know what else to try.

Best of British to you.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

vof

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 221
Re: Sourcing a bass reed for an old 1-row
« Reply #10 on: August 07, 2016, 07:18:54 PM »

On another one which I'm clarting on with, the slot is definitely narrower than the diameter of the axle, which is stuck fast! I've snapped the end off the axle twice, so far, and now it's flush with the woodwork. I'm reticent about cutting into the wood to get more purchase, but I don't know what else to try.

Best of British to you.

[off-topic]
I'm a Geordie and I suspect Edward is too - for southern melnetters, read this page for guidance on the meaning of clarty and its related verb:
http://www.urbandictionary.com/define.php?term=Clarty
[/off-topic]

Vince
Logged
Vince O'Farrell
Dino BPII; Hohners: red Erica G/C; couple of 1040s in C and G project boxes.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Sourcing a bass reed for an old 1-row
« Reply #11 on: August 07, 2016, 11:18:34 PM »

Sorry, I often get wrong off my wife for using colloquialisms when I'm writing. In this instance "clarting" can, indeed, be translated as "messing".
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

vof

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 221
Re: Sourcing a bass reed for an old 1-row
« Reply #12 on: August 07, 2016, 11:36:48 PM »

... get wrong off ...

...and that's another one that me and my brothers and sisters used when growing up in Gateshead, befor'aa larnd better like ya knaa ;)

Vince
Logged
Vince O'Farrell
Dino BPII; Hohners: red Erica G/C; couple of 1040s in C and G project boxes.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Sourcing a bass reed for an old 1-row
« Reply #13 on: August 11, 2016, 06:36:17 AM »


On another one which I'm clarting on with, the slot is definitely narrower than the diameter of the axle, which is stuck fast! I've snapped the end off the axle twice, so far, and now it's flush with the woodwork. I'm reticent about cutting into the wood to get more purchase, but I don't know what else to try.

Sounds like is time for the battery trick!
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Sourcing a bass reed for an old 1-row
« Reply #14 on: August 11, 2016, 08:53:33 AM »

Yes, Kymric, I'm sure you're right. But being an out and out coward, I've been putting it off for weeks now. The keyboard has been languishing on a shelf in my cupboard/workshop for a while. I really must pluck up some courage from somewhere and get cracking!
Thanks for the nudge. 
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal