Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: question about reeds  (Read 3516 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: question about reeds
« Reply #20 on: November 01, 2016, 06:22:19 PM »

Hi many thanks just watched the reed making video wonderful,being a great fan of traditional skills and the handmade by man approach...........but ...........if we are looking for the closest tolerances ,no worn tooling inaccuracies surely a water jet would be perfect i started out as an engineering apprentice Jetmec bexleyheath (hi if anyone may have worked there) and all of the milling machines ,press etc were not exactly cutting edge technology 30 odd years ago 

 https://www.youtube.com/watch?v=PCsoC3i7JYc   

you could perfectly cut the shoes ,cut thickness reeds just rivet and fine tune ?if anyones interested in this my friend could do the cad drawing, if several people wanted a set of say d/g it might be fun,several years ago i considered making duet reeds but it was the cost of tooling that put me off the actual materials are cheap

what do you think?

The spark erosion process (EDM, electro discharge machining) that Harmonikas use for their high-class reeds is a lot more precise than water jet cutting, it's much more suitable for the job.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #21 on: November 01, 2016, 08:14:41 PM »

Hi
Quote
The spark erosion process (EDM, electro discharge machining) that Harmonikas use for their high-class reeds
i wasn't really suggesting making the finest quality reeds, waterjet tolerances would certainly been better and quicker than me sitting for hours with a file and lightbox making concertina shoes "thats a never again job"or even press then file

I don't think the melodeon reeds have tapered slots,mine don't and that was one of the big drawbacks tooling for concertina shoes , i have access to a machine shop press notchers lathes milling machines 12ft guillotine numerous industrial tools ,but nothing that could cut both shoes and reeds in different sizes in multiples from sheet,I,m not suggesting going into reed production, just though it may be an interesting collaborative project

Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal