Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Suggestions for best way to repair?  (Read 1233 times)

0 Members and 1 Guest are viewing this topic.

Roger Howard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 606
Suggestions for best way to repair?
« on: November 16, 2016, 10:40:36 AM »

A question for all those knowledgeable about repairs ...

My Loffet 2.6 row has sustained some damage to the edge off front right hand corner of the case.  :'( How it happened, I don't know, though it looks as if it's been knocked. :-[ It's only cosmetic, but otherwise the box is pristine.  I've taken off the grille, and you can see that on the edge, the veneer on the ply has lifted. Before I set my cack-handed self to do something about it, I'd appreciate any thoughts as to the best way to repair it - even it's only "Send it to [insert name of favourite fettler]!"

I've attached a photo to show the damage as best I can.


Any suggestions gratefully received!  (:)

Roger
« Last Edit: November 16, 2016, 10:46:38 AM by Roger Howard »
Logged
G/C Gaillard 2 row, 3 voice, D/G Lilly, D/G Pariselle 2.6 row, Preciosa Bb/Eb.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Suggestions for best way to repair?
« Reply #1 on: November 16, 2016, 10:59:10 AM »

I can't really understand the injury from that photo,  but if you think you might need to take it to an expert then don't try any repairs yourself. You will only make the experts job more difficult.  Someone who repairs strings would probably be well qualified to fix this. Martyn Banks at Oakwood?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Roger Howard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 606
Re: Suggestions for best way to repair?
« Reply #2 on: November 16, 2016, 01:35:28 PM »

Sorry if the photo didn't make it clear.

I've tried attaching another view which might help. I was wondering about  slipping a very small about of glue under the lifted veneer, and pressing it flat.

Thanks,

Roger
Logged
G/C Gaillard 2 row, 3 voice, D/G Lilly, D/G Pariselle 2.6 row, Preciosa Bb/Eb.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Suggestions for best way to repair?
« Reply #3 on: November 16, 2016, 01:41:21 PM »

I'm not convinced it is veneer, looks more like solid wood. There also seems to be some crushing of the wood. How you approach thexrepair depends on what you want to achieve.  If you just want to stabilise the damaged area and you aren't concerned about appearance the jus put in some glue.  If you do that you more or less say goodbye to the chance of later on getting a cosmetically good repair done later. If you want it to look as good as possible then take it to someone experienced in repairing damaged wood.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Suggestions for best way to repair?
« Reply #4 on: November 16, 2016, 02:09:18 PM »

Yup, looks like it's split along the grain, and as Theo said, no veneer. If it were mine, I'd probably cut the damaged bit out, and skarf a new piece in. Problem is, matching the wood.
I wouldn't tackle it, if you don't know what you're doing. Even if you glue it down, the type of glue you use, will affect any later attempt at a full repair.
You need a professional, doesn't need to be a luthier, but it needs someone who is good at woodwork, a cabinet maker, or some such.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Roger Howard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 606
Re: Suggestions for best way to repair?
« Reply #5 on: November 16, 2016, 03:24:32 PM »

Thanks for those responses. I'll try a local cabinetmaker and see if he can take it on.

Best wishes

Roger
Logged
G/C Gaillard 2 row, 3 voice, D/G Lilly, D/G Pariselle 2.6 row, Preciosa Bb/Eb.

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Suggestions for best way to repair?
« Reply #6 on: November 18, 2016, 06:27:28 AM »

It looks like a split along the grain, either from a mechanical insult or rapid changes in temperature or humidy. The photo is blurry, but it looks to me as if the tip of the lifted section is missing. It I was faced with repairing this, I first inspect the damaged area closely.then make sure that there were no severed wood fragments in the damaged area, dry fit the lifted piece to check for fit and if the fit was good, reglue with hot hide glue. This type of repair is reversible if necessary, unlike like repairs with alphatic resin, epoxy or superglue. If a small area of the lifted fragment is missing, I would consider removing a small portion of wood from the same piece of wood in a non-structurally significant place, in an non-visible area, to make the patch piece.
« Last Edit: November 18, 2016, 06:29:23 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal