Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Different Internal Reed valves?  (Read 1649 times)

0 Members and 1 Guest are viewing this topic.

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Different Internal Reed valves?
« on: September 23, 2017, 09:46:09 AM »

I'm in the process of converting an oddball Serafini Darwin box back to something more normal.

Stripping down the reed-blocks, I noticed that all the internal valves all are a single piece of soft leather (no springs), while the external valves are all what I would consider to be a more modern 'plastic-leaf and leather' combination.

Is this something that just got done to all the external valves because of accessibility, or is there something subtle going on here? I.e. that within the protected confines of the reed chamber, a single piece of leather works better?

Should have mentioned ... this is just on the chord reeds.
« Last Edit: September 23, 2017, 09:49:11 AM by ChrisLDD »
Logged
Trying to learn enough magic to make my own melodeon.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Different Internal Reed valves?
« Reply #1 on: September 23, 2017, 10:25:08 AM »

Is this something that just got done to all the external valves because of accessibility....

Yes, I suspect this is probably the case. I would guess that the valves were originally all leather. I've often observed that as leather valves age, the outside valves seem more prone to curling (and damage) than the inside valves. Possibly someone has renewed the outside valves but left the inside ones alone, maybe because they were OK, but more likely to avoid removing the reed plates from the wax. A bit of an ill-advised short-cut in my opinion, as the type of valve material can affect the sound quality, and ideally you want the push and pull reeds to sound as similar as possible.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Different Internal Reed valves?
« Reply #2 on: September 23, 2017, 10:45:02 AM »

I cannot tell a lie it was me that replaced the chord reed valves with 'plastic-leaf and leather' combination.

They were replaced because, as discussed previously in ChrisLDD's other thread, due to the close proximity of the bellows to block the original valves were all damaged by becoming trapped in the bellows folds and curled. I offered to replace them all with the same type of valve but the customer (always right) wanted the least costly solution.

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: Different Internal Reed valves?
« Reply #3 on: September 25, 2017, 09:34:26 AM »

Is this something that just got done to all the external valves because of accessibility....

Yes, I suspect this is probably the case. I would guess that the valves were originally all leather. I've often observed that as leather valves age, the outside valves seem more prone to curling (and damage) than the inside valves. Possibly someone has renewed the outside valves but left the inside ones alone, maybe because they were OK, but more likely to avoid removing the reed plates from the wax. A bit of an ill-advised short-cut in my opinion, as the type of valve material can affect the sound quality, and ideally you want the push and pull reeds to sound as similar as possible.

Ahh ... I see from Lester's post, your suspicions were totally correct - I will replace with leather valves, as originally fitted.
Logged
Trying to learn enough magic to make my own melodeon.

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: Different Internal Reed valves?
« Reply #4 on: September 25, 2017, 09:41:43 AM »

I cannot tell a lie it was me that replaced the chord reed valves with 'plastic-leaf and leather' combination.

They were replaced because, as discussed previously in ChrisLDD's other thread, due to the close proximity of the bellows to block the original valves were all damaged by becoming trapped in the bellows folds and curled. I offered to replace them all with the same type of valve but the customer (always right) wanted the least costly solution.

Thanks for the info Lester - the box internals are definitely tight for space around the reedblocks.
Just wondering about the supplier of the valves you used - they're nice quality, and better than anything similar I have to hand.
Logged
Trying to learn enough magic to make my own melodeon.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Different Internal Reed valves?
« Reply #5 on: September 25, 2017, 09:57:34 AM »

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: Different Internal Reed valves?
« Reply #6 on: September 26, 2017, 11:10:22 AM »

These ones I expect

http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Valves.html#5

Thank you Theo - I checked, and found I'd ordered just about every other type of valve except those! Order now placed with CGM.
Logged
Trying to learn enough magic to make my own melodeon.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal