Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Reed Blocks - Pressword vs Erica??  (Read 1006 times)

0 Members and 1 Guest are viewing this topic.

ProperTing

  • Member
  • *
  • Offline Offline
  • Posts: 37
Hohner Reed Blocks - Pressword vs Erica??
« on: January 02, 2018, 01:26:31 PM »

Are there any differences?? Can I take the blocks out of an Erica and slip them into a Presswood??
Logged
Pariselle, Paolo Soprani & Hohner

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Reed Blocks - Pressword vs Erica??
« Reply #1 on: January 02, 2018, 01:48:47 PM »

There are some differences,  mainly depending on when they were made.  Generally the answer is you need to make some fairly simple modifications.

The gasket may be on the reed block (early versions) or on the fondo (late versions).  You need the gasket on one surface only.

The clip that secures the reed block may be one of three different designs so you might need to do a little woodwork to get the clip and reed block to work together, and the “toe” at the large end of the reed block may need to be adjusted in thickness to get a snug fit.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

ProperTing

  • Member
  • *
  • Offline Offline
  • Posts: 37
Re: Hohner Reed Blocks - Pressword vs Erica??
« Reply #2 on: January 02, 2018, 02:41:09 PM »

Much obliged sir!  :|glug
Logged
Pariselle, Paolo Soprani & Hohner
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal