Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Leather Replacement On Valves  (Read 1026 times)

0 Members and 1 Guest are viewing this topic.

Charles M

  • New Starter
  • Offline Offline
  • Posts: 1
Leather Replacement On Valves
« on: February 27, 2018, 09:49:53 AM »

Apparently I'm lacking in the area of accordion nomenclature: The flat, rectangular, aluminum bars that are on the end of spring loaded rods, that open and close on square holes, have a piece of what appears to be leather glued on them. I am not talking about the tiny strips of leather that act as one way valves and sit almost on top of the reeds. I always thought these rectangular pieces of aluminum were the "valves" , but I'm apparently wrong. I would think they are called pads of some sort. In any event, whatever these open/close rectangular metal pieces are called, are in need of having that fabric replaced. I need to know what the fabric is and a suitable adhesive and where I can buy some ? I guess I will remove them from the rods (easy enough) and soak them in something to get the old fabric (leather ?) off and then clean them a bit with sand paper. Afterwards I will glue these new pads on. My reason for replacing them is that I'm losing a lot of air somewhere and when I was applying some bellows pressure with a cover off, I could feel a slight rush of air coming from those pads. Obviously they are not sealing very well when in the closed position and I take it they need to be replaced now.

Thank you
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Leather Replacement On Valves
« Reply #1 on: February 27, 2018, 10:12:51 AM »

Hello and welcome, Charles M. The pads you mention are generally known as pallets, and refacing them with new stuff is quite a common thing.
Your man to supply the composite leather/felt material is another Charles M! (More often known as Charlie Marshall at GCM Musical Services.) A very reliable, prompt and good value supplier, used and recommended by many on here.

http://www.cgmmusical.co.uk
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leather Replacement On Valves
« Reply #2 on: February 27, 2018, 10:23:48 AM »

Hello and welcome, Charles M. The pads you mention are generally known as pallets,

Yes they are called pallets here in Uk.   In USA and Italy the same parts are called valves.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal