Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Inside/outside row pallets corresponding to buttons - a question  (Read 734 times)

0 Members and 1 Guest are viewing this topic.

Barlow

  • Bad player, good talker apparently
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 111
  • Castagnari Lilly B/C Erica D/G

The inside row buttons correspond to the lower pallets/tone holes (so shorter arm), and the outside row button to the upper pallets/tone holes (longer arm).

In order to make the two rows as equal as possible, why doesn't the inside row use upper holes, and the outside row lower holes?
Logged
. . .

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Inside/outside row pallets corresponding to buttons - a question
« Reply #1 on: April 19, 2019, 10:47:42 AM »

With simple levers arranged as you suggest then the geometry of the levers would mean that the inner row pallets would open much further than the outer row
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal