Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Glue for sticking things to celluloid finish  (Read 3532 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Glue for sticking things to celluloid finish
« on: April 16, 2015, 07:26:11 AM »

Hi
I need to reattach some trim to a celluloid finish. Any recommendations on glue for this? I was wondering about superglue but also concerned this might react with the celluloid. Or Bostick Solvent free which seems to be pretty strong. The trim is slightly sprung around a curve so the glue needs to be strong.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Glue for sticking things to celluloid finish
« Reply #1 on: April 16, 2015, 09:18:59 AM »

I have used a double sided bonding tape to fix a badge to a box. 3M do all sorts of industrial strengths. No room for error though, it takes some removing if you get it wrong. But at least you can clean of the residue with meths.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Glue for sticking things to celluloid finish
« Reply #2 on: April 18, 2015, 05:57:02 PM »

super glue works fine if the item is not celluloid , it will not react with the celluloid in any manner.
If the trim is celluloid , or the metal trim with celluloid on the back , I use clear nail polish as a adhesive. You will want to use masking tape to hold the item in place for several hours, but the results are very good.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Glue for sticking things to celluloid finish
« Reply #3 on: August 21, 2019, 08:15:48 PM »

Hello Roger T,
                            I now have this same problem of detached trim needing to be reattached to celluloid. I was wandering what you eventually used & the result. The box I,m working on is a Club 3 BF and a previous owner glued on another corner trim with what looks like superglue which ran and left a mess. Thanks for any info.
                                                                                                                         John
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Glue for sticking things to celluloid finish
« Reply #4 on: August 21, 2019, 11:31:33 PM »

... I use clear nail polish as a adhesive. You will want to use masking tape to hold the item in place for several hours, but the results are very good.

My recollection is that acetone (active ingredient in nail polish) is a very good solvent for celluloid and will mark any it comes into contact with, so you have to be extremely carefully not to get it on any show surfaces.

Or, am I thinking of perspex?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Glue for sticking things to celluloid finish
« Reply #5 on: August 22, 2019, 06:13:54 AM »

Acetone definately will melt celluloid. Double sided tape would be strong enough but would lift the trim above the surface. Pva might work and its easy to clean off any excess -but I,m not sure how well it bonds with metal.  I think the trim was originaly held on with some kind of hot melt glue.  I,ll do a couple of trials on an old scrap box first just to be safe...
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glue for sticking things to celluloid finish
« Reply #6 on: August 22, 2019, 08:35:33 AM »

The traditional glue for celluloid is celluloid scraps dissolved in acetone.  Nail varnish is pretty much the same so just follow the advice in a previous post from Kimric Smythe.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Glue for sticking things to celluloid finish
« Reply #7 on: August 22, 2019, 05:05:51 PM »

Och but all my nail varnish has glitter in it!   After experimenting It turns out  -   the experts were right!
  I never doubted them for a minute.   (Ok I did).   So, the hot glue gun - no good - the glue went cold instantly .
   Next -  superglue  - refused to stick at all! + messy,dont even bother.  PVA glue which I thought would be the easiest was  messy and doesnt grab straight away so slides about when trying to clamp in position. Not sure about the strength of the bond either.

  So lastly I mixed a inch square bit of celluloid with about 5ml of  100% acetone in a foil empty cat food tray and stirred for about 5 mins until it dissolved into a soft toffee-like mush.I was worried about how to apply this stuff but it turned out to be the easiest method of all.  Applied with a cocktail stick & plonked into position - it stays!   Piece of cake!   ( I had the nibbles after all the fumes - note to self - next time open a window)  The mixture is also very good/easy for attaching the odd bit of celluloid that needs replacing.   I'm going for a lie down now, I have a headache...
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Glue for sticking things to celluloid finish
« Reply #8 on: August 23, 2019, 06:28:05 PM »

Update:-  After leaving them clamped for 24 hours, the strongest bond was  PVA glue!
 The one with the acetone / celluloid mixture came off with a very slight tug!
   So, for me anyway  -   pva, or more acurately -  Evo Stick wood Adhesive  -  every time.     
                                                                                                                                                           John
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal