Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Complete teardown to replace a few leather bellows gussets?  (Read 935 times)

0 Members and 1 Guest are viewing this topic.

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Complete teardown to replace a few leather bellows gussets?
« on: January 01, 2021, 12:22:55 AM »

Hi all, first, happy new year!  In the words of Sherman Potter, may she be a damn sight better than the old one.
https://www.youtube.com/watch?v=Q5GkMdx4OlM

Question: I have some bellows that are mostly ok, and could get away just with a retaping, but for the fact that a few of the leather corner gussets are shot.  My understanding is that the gussets should be replaced from the outside, then covered with paper, and the corners and tape over that.  So figure I'll have to remove the existing paper to get at them -- and this means a complete repapering, since I doubt I can lift and replace the paper without any ugly side effects.  Is there a workaround for this that I'm missing?
« Last Edit: January 01, 2021, 12:42:29 AM by Gonk »
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #1 on: January 01, 2021, 06:59:36 AM »

I have been doing a bit of this recently.

As Mark said in another thread, you can laminate the leather from the inside for workable solution if it is only a few, however if a few have gone the rest will follow.

I have not been happy with the result unless i replaced the lot, and recovered.

Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #2 on: January 02, 2021, 07:55:32 PM »

Gav, thanks - that's pretty much what I expected.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #3 on: January 02, 2021, 08:21:57 PM »

I'm doing just this at the moment.
Specifically to find out how horrible it is.
I'm using a steam cleaner to help get the paper off, then I'll replace some of the slug eaten leather corners.
I wait with bated breath for the next instalment.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #4 on: January 02, 2021, 08:24:55 PM »

I've just repaired a set of bellows with about a dozen perforated gussets.   Patches applied internally with very thin (about .5mm) soft leather, skived all edges.  Took less than an hour in total and the bellows is airtight and no affect on external appearance.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #5 on: January 03, 2021, 03:31:36 AM »

Patches applied internally with very thin (about .5mm) soft leather, skived all edges.

Thanks Theo, that emboldened me to try that first.  If I do a complete restoration later, no harm done.

I just received a skiver in the mail today, which is good for making paper thin strips of topskin.  Those seem to be just the thing for gluing to the back of the existing leathers.  I used Fabri-Tac to glue them.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #6 on: January 03, 2021, 01:36:32 PM »

Hi Theo, do you use a skiving machine (no joke), or do them by hand? Also what glue?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #7 on: January 03, 2021, 01:46:42 PM »

On these patches I use a skiving knife by hand to skive the edges.  The leather was already thin enough.  If you go too thin you just end up with the epidermis which is often perforated with hair follicles.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Complete teardown to replace a few leather bellows gussets?
« Reply #8 on: January 03, 2021, 05:37:13 PM »

Theo, I will try going a little thicker then.  I tried to blow through the sheets I made, and couldn't, so they're certainly a step up from the lace that was there...this may be due to the fact that it was treated and perhaps sealed (waxed?) on the surface.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal