Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Can G/C reed blocks be tuned to B/C? How far can a reed really go?  (Read 1345 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144

As the title asks, is this possible? Im not really looking to do this, but I am curious what the limits are to altering the pitch of a reed. Ive seen some reeds driven up or down pitches a considerable amount, but its my understanding that this dramatic of an alteration can disturb how the reed responds or functions, which is more often than not a negative effect. Dramatic retunes have happened a fair amount to concertinas for example, and the results are not always pleasant. Many a fine Jeffries reed has been mangled in the pursuit of a more 'desirable' pitch.

So, if you had a G/C set of reeds in your box, where is the transposition limit? How high (or Low) can you go before the reed begins to act terribly?
« Last Edit: March 23, 2022, 04:05:05 PM by Ross Dubois »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #1 on: March 23, 2022, 05:19:43 PM »

There isn’t a simple answer to this.  A semitone up or down is usually possible, but high pitch reeds can usually be tuned down more than up,  and to some extent low reeds can be tuned up more than down. In your example you couldn’t simply tune all the C reeds up by a major third to B.  Usually you have to adopt a different strategy and move the reeds around to minimise the pitch changes. So for example the 4th button BC on a G row can become the third button on a B row without changing pitch.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #2 on: March 23, 2022, 05:30:34 PM »

Surely the C row would stay as it is. I posted a plan for converting the G row to a B row in another thread yesterday, here it is again for at least the third time on the forum. (I will get around to using it!)

Mike Rowbotham explained the basics to me and approved this plan.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #3 on: March 23, 2022, 05:37:57 PM »

I think Theo meant "tuning the G reeds up by a major third"
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #4 on: March 23, 2022, 06:52:14 PM »

I think Theo meant "tuning the G reeds up by a major third"

That makes more sense. Why would you mess with the C row. Basses are going to be the next issue I think.
Logged

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #5 on: March 23, 2022, 09:04:25 PM »

Ah I see, thanks all for the replies. So the idea of pushing up beyond a semi tone/ half step is not the best idea. That explains why I've seen most pitch conversions within those boundaries.
Keeping the C block as is would make sense, and if you wanted a B set, you'd have to mix and match some of the reeds for the G block with another set in order to make the whole block B, gotcha.

I do like the idea of having a B/C set of different reeds, C/C#, C#/D or D/D# for my box to swap out, but I certainly wouldn't want to modify reeds so dramatically just to get that. I have a nice set of H reeds in G/C which deserve to be left alone, so rather than entertain such modification, id sooner look to trade some day. Not in any rush anyway!

Now, ive one other somewhat related question:

Has anyone had much luck with tuning some unisonoric reeds into bisonoric? If tuning up a semi tone isn't too rough, one of the reeds on a E plate could be made into an F, and a B could be a C? Just curious!
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #6 on: March 23, 2022, 09:54:19 PM »

Unisonoric or bisonoric, it makes no difference (the reeds don't know which type they are !  ;) )
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #7 on: March 23, 2022, 09:56:38 PM »

"Has anyone had much luck with tuning some unisonoric reeds into bisonoric?"

That's how I've done most of the conversions which I've tackled, and I expect it's also what many other cheapskates have done as well. The major difficulty I've found with this approach is the varying lengths of the reed plates, it seems that the unisonoric plates are often longer than the bisonoric ones, in my experience anyway.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #8 on: March 23, 2022, 10:08:16 PM »

Micheal, im not sure what you mean. Ive contemplated this quite a bit and I only ask questions when I cannot produce an answer. Its better to ask than to make assumptions and produce potentially disastrous results. Edit- in response to your subsequent (edited) comment below: I use the search function religiously. I only ask when I cannot find an answer after a great deal of hunting. No, not inventing the wheel. Im not sure what I've done to merit the sarcasm and snark, thought this was a place for posits and queries?

Winston,
Thank you for your reply.  It seemed like that might be something folks might have done, I appreciate your confirming that. Theo's comments on the potential limitations of raising/lowering pitch combined with your experience answers quite a lot. Thanks for the info! It might be something worth experimenting with (within reason, as you mention length might prove challenging) as I have a fair number of reeds on hand
« Last Edit: March 23, 2022, 10:43:40 PM by Ross Dubois »
Logged

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #9 on: March 23, 2022, 10:13:51 PM »

Yes, but over the years there is a lot of info. already especially on this website. I may be interested in your research over the course of time.

Best wishes,
Michael
« Last Edit: March 23, 2022, 10:39:01 PM by Michael Driscoll »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #10 on: March 24, 2022, 07:44:26 AM »

"I only ask when I cannot find an answer after a great deal of hunting."

I've never had much luck with the search engine on here. I suspect that because I don't use searches a great deal, generally, I'm not using the correct phraseology when asking my questions.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #11 on: March 24, 2022, 01:44:29 PM »

"I only ask when I cannot find an answer after a great deal of hunting."

I've never had much luck with the search engine on here. I suspect that because I don't use searches a great deal, generally, I'm not using the correct phraseology when asking my questions.

As Theo and others have often mentioned, this is first and foremost a discussion forum (rather than an information database), so it is perfectly acceptable to ask questions that have already been asked a thousand times before!  The search function is also far from perfect; I've often found posts containing the word I searched for omitted from my search results, necessitating me finding those posts by other means (and the searched, isolated word is indeed contained in those posts - no idea why the search engine skipped them).  There are also several other limitations within the search function that makes it unworkable to search for certain things.  It's all good - ask away anytime : )

"Has anyone had much luck with tuning some unisonoric reeds into bisonoric?"

That's how I've done most of the conversions which I've tackled, and I expect it's also what many other cheapskates have done as well. The major difficulty I've found with this approach is the varying lengths of the reed plates, it seems that the unisonoric plates are often longer than the bisonoric ones, in my experience anyway.

This is primarily what I do when I need replacement reeds, given that I have thousands of spares from PAs.  To make a diatonic reed, I will typically use one that is between the two pitches, so that each side only gets tuned up or down a semitone.  For example, if I need a D/E reed, I will retune a D# reedplate. With a good file, this job can take less than a minute!

Winston, I would agree with you that very often PA reeds are a longer scale length than the typical diatonic reed, particularly those that are of higher quality.  I find this to be an advantage, as I personally really like the response of longer scale reeds.  I recently made an entire set of MMM reeds for a two-row box for this very reason, using beautiful handmade Catraro reeds which were noticeably more responsive than the set of Voci Armoniche reeds that were in it before.  I've attached a photo showing one of these re-tuned reeds next to a spare Hohner reed that is the exact same note/pitch - it really illustrates the difference in scale lengths you mentioned.
« Last Edit: March 24, 2022, 01:46:50 PM by mselic »
Logged
C#/D player

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #12 on: March 24, 2022, 03:07:50 PM »

I've never had much luck with the search engine on here. I suspect that because I don't use searches a great deal, generally, I'm not using the correct phraseology when asking my questions.

I generally go to Google and enter the search query "site:forum.melodeon.net tuning" (or whatever).
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #13 on: March 28, 2022, 10:54:48 PM »

I have "made" two tone reeds out of unisonic reeds on occasion. The reeds being shorter may have something to do with the higher air pressure expressed by smaller bellows. Larger reeds can distort when played at a higher pressure sometimes.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Can G/C reed blocks be tuned to B/C? How far can a reed really go?
« Reply #14 on: March 30, 2022, 05:46:27 AM »

You can also tip load reeds to different degrees to produce bisonoric reed plates from unisonoric plates, though be mindful not to get too out of hand with it.
Logged
Too many accordions, help!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal