Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: "SNAPPING" THE BELLOWS SHUT TIGHT  (Read 9778 times)

0 Members and 1 Guest are viewing this topic.

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #20 on: December 11, 2009, 04:42:12 AM »

Matthew,

 You are so right, I like what you said! : -) "The finality of the "snap" also communicates to my nearest and dearest that I'm done playing".

But the "feet thingy", maybe Theo will tell me to post this on a new topic...not sure, but here goes.  There are little half metal spheres like 1/4 to 1/2 inch feet on my Erica.   Not sure if they just pop off if I pry them?.  Then do I just go to my local hardware shop and buy 4 little rubber feet and screw them in?. They probably won't be long enough...I'm just afraid the screws might damage something underneath.  But I'll have to do something because my ERICA will  no longer  stand on her feet!... :-(

I just measured the proper height feet I would need, almost 1 inch so the leather bass strap would  not push and add pressure  on the bass side of my Erica.

Mario



« Last Edit: December 11, 2009, 05:15:37 AM by callmemario »
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #21 on: December 11, 2009, 05:09:59 AM »

Steve, you're absolutely right on all accounts.  The only problem is, I've bought like 3 humidifiers for my instrument room and none of them did the job right (they just could'nt get the humidity level to 50% where I wanted it... so I ended up returning them and ended up  installing ocean wave humidifiers (with the wet sponge inside the little casing) in the sound holes of my acoustic guitars and keep the cases shut tight!..  As for My Fender Telecaster and Erica...I haven't found a solution yet... ??? and that kills me because I KNOW how important proper humidity levels are crucial to our wooden instruments!!.

Mario

****************************************************** 
Actually in Montreal (where Mario and I live) in winter nearly all homes require a humidifier to make them a safe place for wooden instruments...//
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #22 on: December 11, 2009, 08:24:23 AM »

You don't need it as high as 50%. Acoustic instruments are usually made at 40-45% RH, which is roughly the middle of the range of humidity they're likely to be exposed to, and once they're assembled and have finish applied they can handle being wetter or drier than that. If you can get it up past 30% then I wouldn't worry, especially with an electric guitar made of relatively thick wood with a lot of finish on it and a melodeon with a celluloid covered plywood case.

Instruments need care and attention but they don't need to be coddled.
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #23 on: December 11, 2009, 08:34:52 AM »

Instruments need care and attention but they don't need to be coddled.

Just think what a 1930s Hohner or 1850s violin has been through in terms of temperature and humidity, and there are plenty of them around which have not suffered any irreparable damage!
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #24 on: December 11, 2009, 11:00:17 AM »

The ecological way is to keep well watered plants in the room.  You just have to make sure you don't kill the plants by under-watering them.
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #25 on: December 11, 2009, 12:03:55 PM »


But the "feet thingy", maybe Theo will tell me to post this on a new topic...not sure, but here goes.  There are little half metal spheres like 1/4 to 1/2 inch feet on my Erica.   Not sure if they just pop off if I pry them?.  Then do I just go to my local hardware shop and buy 4 little rubber feet and screw them in?. They probably won't be long enough...I'm just afraid the screws might damage something underneath.  But I'll have to do something because my ERICA will  no longer  stand on her feet!... :-(

I just measured the proper height feet I would need, almost 1 inch so the leather bass strap would  not push and add pressure  on the bass side of my Erica.

Take the bass plate off the accordion to remove the existing feet and fit new ones. That way you won't risk damaging anything inside. But you'll probably find that there's plenty of room inside the bass end of an Erica to accommodate screw heads or nuts for the new feet.
Logged

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #26 on: December 11, 2009, 01:40:14 PM »

Hmmm...ok, thanks!

You don't need it as high as 50%. Acoustic instruments are usually made at 40-45% RH...///...especially with an electric guitar made of relatively thick wood with a lot of finish on it and a melodeon with a celluloid covered plywood case.

Instruments need care and attention but they don't need to be coddled.
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: "SNAPPING" THE BELLOWS SHUT TIGHT
« Reply #27 on: December 11, 2009, 01:43:33 PM »

Great,  thanks Bill for the advice, another fun little job to do...now I have to find a new "pair" of feet for Erica! ;-)

Mario
********************************************************

Take the bass plate off the accordion to remove the existing feet and fit new ones. That way you won't risk damaging anything inside. But you'll probably find that there's plenty of room inside the bass end of an Erica to accommodate screw heads or nuts for the new feet.
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal